External Sources
English
Using a non-USB device
1Connect the audio out terminals of the external equipment (TV,VCR, Laser Disc player, DVD player or CD Recorder) to the AUX IN socket of your system.
2Press USB/AUX to select external equipment.
Note:
– Refer to the operating instructions of your connected equipment for details.
Using a USB mass storage device
By connecting a USB mass storage device to the system, you can enjoy the device's stored music through the system's powerful speakers.
1Check the USB device has been properly connected. (See Installation: Connecting an additional appliance).
2Press USB/AUX once or more to select USB.
– no AUdIO appears if no audio file is found in the USB device.
3Refer to the Quick Start Guide or the Controls page of this manual for basic playback features.
Playing a USB mass storage device Compatible USB mass storage devices
You can use:
–USB flash memory (USB 2.0 or USB1.1)
–USB flash players (USB 2.0 or USB1.1)
–memory cards (requires an additional card reader)
INFORMATION REGARDING USB DIRECT:
1.Compatibility of the USB connection on this system:
a)This product supports most USB Mass storage devices (MSD) that are compliant to the USB MSD standards.
i)Most common Mass storage class devices are flash drives, memory sticks, jump drives and etc.
ii)If you see a "Disc Drive" showing up on your computer after you have plugged the mass storage device into your computer, most likely it is MSD compliant and it will work with this system.
b)If your Mass storage device requires a battery/ power source please make sure you have a fresh battery inserted or charge the USB device before connecting to the system.
2.Supported Music type:
a)This device only supports unprotected music with the following file extension:
.mp3
.wma
b)Music bought from
c)File name extensions that end with the following are not supported:
.wav; .m4a; .m4p; mp4; .aac and etc.
3.Playback of audio files through the system's speakers is not possible if you connect directly from your computer to the USB socket.
18