Radio Reception
Tuning to radio stations
1Press TUNER to select the tuner source.
2Hold S/T and then release the button. ➜ The system will start searching for a radio station with sufficient signal strength.
3Repeat step 2 if necessary until you find the desired station.
●To tune to a weak station, press S/T briefly and repeatedly.
Programming radio stations
You can store up to a total of 20 radio stations in the memory.
Automatic programming
Automatic programming will start at preset number 1 and all your former presets will be overridden.
●Press PROG/ CLOCK for more than 3 seconds to activate programming.
➜ All available stations are programmed.
Manual programming
1Tune to your desired station (refer to “Tuning to radio stations”).
2Press PROG/CLOCK to activate programming.
➜ PROG flashes in the display.
3Press ALBUM/PRESET 3 4 to allocate a number from 1 to 20 to this station.
4Press PROG/CLOCK again to confirm the setting.
➜ PROG disappears, the preset number and the frequency of the preset station are shown.
5Repeat the above four steps to store other stations.
●You can override a preset station by storing another frequency in its place.
Tuning to preset radio stations
●Press ALBUM/PRESET 3 / 4 until the desired preset station is displayed.
English
17