Philips DC350 Connect a device for the first time, Disconnect a device, Re-connect a device

a Enable Bluetooth to search for other Bluetooth devices. (Refer to the user manual on how to enable the function.)

b When “ PHILIPS DC350” is recognized and displayed, select it to start to connect.

c When prompted for a password, enter “0000”.

4 Wait until you hear a double beep from the DC350.

» The connection is complete.The Bluetooth indicator turns on. To connect more bluetooth devices

Connect a device for the first time

1Press BLUETOOTH to select the Bluetooth source.

»[BT] (Bluetooth) is displayed.

2Press and hold PAIRING for more than 3 seconds.

»[PAIRING] (Pairing) is displayed, and the Bluetooth indicator blinks.

3On the device, set up the Bluetooth connection:

E n g l i s h

1

2

Disconnect the connected device. (see ‘Disconnect a device’ on page 19) Repeat the steps 1-4 in “Connect a device for the first time”.

Tip

•If no connection is made within one minute, [FAILED] (failed) is displayed on the DC350.

Disconnect a device

1Press and hold for more than 5 seconds

» [DISCONNECT] (disconnect) is displayed on the DC350.

•When you turn off the connected device or move it beyond the communication range, you hear a long beep from the DC350.

Re-connect a device

After you have connected a device for the first time, once its Bluetooth function is enabled, it re-connects automatically. (see ‘Connect a device for the first time’ on page 19)

1Ensure that on the device, you have turned on the Bluetooth function. (Refer to the user manual on how to enable the function.)

2Turn on the DC350.

»The Bluetooth connection is automatically made, and the Bluetooth indicator turns on.

»When more than one previously-connected device is in the operational range: If an iPhone is docked, it is re-connected first.

All other devices are re-connected sequentially:The first device that was connected for the first time will be re-connected first.

EN 19