Troubleshooting guide, Specifications | Panasonic SH-FX80 specs

is 8661En&Cf.fmPageflashing. 8Monday, April17,200611:32AMinto the AC outlet.

Troubleshooting guide

Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the solutions indicated in the table do not solve the problem, refer to the “Customer Services Directory” page 5.

On your home theater unit

The wireless link indicator (e.g. “ [W] ” or LED) ≥ Ensure that the digital transceiver is fully inserted into the slot of the home theater unit.
does not light.	≥ Check that the home theater unit is turned on.
The wireless link indicator (e.g. “ [W] ” or LED)	≥ There is no link between the home theater unit and the wireless sound system. Check that the wireless sound system is plugged

≥Ensure that the selector on the wireless sound system is set to MAIN SET.

≥Ensure that the wireless sound system is within 15 m (49 ft) of the home theater unit.

≥When the SH-FX60 wireless system is paired with the SB-FX80 wireless sound system, ensure that the SH-FX60 is plugged into the AC outlet.

There is no sound when the selected source ≥ The “REAR MUSIC P.” source is not available for the SH-FX80 wireless sound system.
on the home theater unit is “REAR MUSIC P.”.	To play audio from an external device through your home theater unit, connect to the MUSIC PORT on the home theater unit and
	select “FRONT MUSIC P.” as the source. (Refer also to your home theater unit’s operating instructions.)

≥When using the wireless sound system as a stand-alone audio amplifier, ensure that the selector on the wireless sound system is set to MUSIC PORT.

The wireless link indicator (e.g. “ [W] ” or LED)	≥ When playing from a 2-channel audio source (e.g. AM/FM station, music CD, etc.), turn on one of the surround sound effects of
is lit, but there is no sound from the SB-FX80	your home theater system (e.g. SURROUND MUSIC) in order to utilize all audio channels. (Refer also to your home theater unit’s
wireless sound system.	operating instructions.)
	≥ When using the wireless sound system as a stand-alone audio amplifier, ensure that the selector on the wireless sound system is
	set to MUSIC PORT.
	≥ When the SH-FX60 wireless system is paired with the SB-FX80 wireless sound system, the wireless link indicator on your home
	theater unit (e.g. “ [W] ” or LED) will light when there is a link with the SH-FX60, even when there is no link with the SB-FX80.
	1.	Check that the SB-FX80 is plugged into the AC outlet.
	2.	Ensure that the selector on the SB-FX80 is set to MAIN SET.
	3.	Ensure that the SB-FX80 is within 15 m (49 ft) of the home theater unit.
	4.	Adjust the volume of your home theater unit.
	5.	If there is still no sound, repeat the pairing procedure on page 4.

The wireless link indicator (e.g. “ [W] ” or LED)	≥ When playing from a 2-channel audio source (e.g. AM/FM station, music CD, etc.), turn on one of the surround sound effects of
is lit, but there is no sound from the SH-FX60	your home theater system (e.g. SURROUND MUSIC) in order to utilize all audio channels. (Refer also to your home theater unit’s
wireless system.	operating instructions.)
	≥ The wrong transceiver card has been inserted into the home theater unit. (The SH-FX80T transceiver card cannot be used with the
	SH-FX60 wireless system.)
	1.	Turn off your home theater system, remove the SH-FX80T transceiver card, and insert the SH-FX60T transceiver card.
	2.	Turn on your home theater system, and then follow the pairing procedure on page 4.
	3.	Adjust the volume of your home theater unit.
After pairing the SB-FX80 wireless sound	≥ Ensure that the SH-FX60 wireless system is unplugged, and then repeat the pairing procedure on page 4.
system with the SH-FX60 wireless system,
audio output is erratic.

Specifications

AMPLIFIER SECTION		RF SECTION
Output power		Wireless module
RMS output power stereo mode		Frequency range	2.436 to 2.458 GHz
Surround Ch (both ch driven)	65 W per channel (4 ≠), 1 kHz, 10 % THD	RF output power	19 dBm (Max)
Total RMS stereo mode power	130 W	MUSIC PORT terminal
FTC output power stereo mode		Input sensitivity	100 mV
Surround Ch (both ch driven)	40 W per channel (4 ≠), 120 Hz–20 kHz, 1 % THD	Input impedance	4.7 k≠
Total FTC stereo mode power	80 W	Terminal	Stereo, 3.5 mm (1/8z) jack

SPEAKER SECTION		GENERAL
[Surround\speakers\SB-FX80]		Power supply	AC 120 V, 60 Hz
Type	1 way, 1 speaker system (Bass reflex)	Power consumption	Digital transceiver	0.85 W
	(L and R ch in one box)		Wireless sound system	30 W
Speaker unit(s)	Impedance 4 ≠	Dimensions (WtHtD)
Full range	6.5 cm (21/2z) Cone type	Digital transceiver	97 mmk47.5 mmk8.5 mm (313/16zk17/8zk11/32z)
Input power (IEC)	90 W§ (Max)	Wireless sound system	430 mmk197.5 mmk174.5 mm (1615/16zk725/32zk67/8z)
Output sound pressure	80 dB/W (1.0 m)	Mass
Frequency range	100 Hz–25 kHz (j16 dB)	Digital transceiver	0.03 kg (0.07 Ibs)
	115 Hz–22 kHz (j10 dB)	Wireless sound system	2.7 kg (6 Ibs)
		Operating temperature range	r5 oC to r35 oC (r41 oF to r95 oF)
		Operating humidity range	5 % to 90 % RH (no condensation)

		Power consumption in standby mode		3 W

		§ Rating with low-cut filter equipped amplifier

[Note]

1. Specifications are subject to change without notice. Mass and dimensions are approximate.

2. Total harmonic distortion is measured by a digital spectrum analyzer.