BASIC FUNCTIONS
RECORD | |
CD | CD |
| |
| ILE CD |
COMP | |
| RECTYPE |
| E |
| ERAS |
| IZE |
FINAL | |
T |
|
LOUDNESS
•Press LOUDNESS to switch loudness either on or off. yLOUDNESS is shown and Loudness is displayed if
loudness is on.
MUTE
This feature allows you to temporarily switch off the sound without switching off the set.
1Press MUTE on the remote control to switch off the sound. yMute is displayed and playback/recording will be
continued without sound.
English
Sound control
Volume adjustment
•Adjust the volume by using MASTER VOLUME
Incredible Surround
Stereo sound is determined by the distance between the front speakers. Incredible Surround enables you to enjoy an incredibly wide stereo effect, regardless of the speakers’ distance.
•Press INCREDIBLE SURR. (INCREDIBLE SURROUND on the remote control) to switch the surround sound effect either on or off.
yINCREDIBLE SURROUND is shown and Incredible
Surround is displayed if the surround sound effect is on.
Note: The effect of Incredible Surround may vary with different types of music.
Treble and Bass level adjustment
1Press TREBLE or BASS on the set.
yThe volume rotary is activated to select the treble/bass settings.
2Turn the volume rotary to adjust the treble or bass.
yTreble or Bass and the actual value (between
Note: If the volume rotary is not turned for 5 seconds, it will switch back to volume.
PURE
•Press PURE repeatedly to switch bass and treble settings either on or off.
yPURE is shown and Pure is displayed if bass and treble settings are switched off.
yOptimal is displayed if preset bass and treble settings are switched on.
yPersonal is displayed if personal preset bass and treble settings are switched on.
2Press MUTE on the remote control again to switch on the sound again.
Speaker balance
It is possible to adjust the relative volume balance between the connected front speakers.
•Press L BALANCE or R BALANCE on the remote control to adjust the relative volume of the left or right front speaker. yBalance L (or R) and the actual volume of the left
(or right) front speaker are displayed. yWhen the volume of both speakers is balanced,
Balance L=R is displayed.
Demo mode
The demo mode displays various features of the set and will start automatically.
•If any source key is pressed:
yThe set switches to the selected source.
If y STANDBY ON is pressed:
yThe set switches to standby. After a few seconds, the demonstration will start again.
Cancelling the demo mode
•Keep Ç STOP on the set pressed for at least 3 seconds to cancel the demo mode.
yThe demo mode is cancelled permanently. The set switches to standby. A few seconds later the set switches to an economy power save mode.
13