Philips FW-R8 manual Programming track numbers, Erasing a track from the program

Page 15

PROGRAM

RECORD

 

 

CD

CD

 

COMPILE

CD

 

MIC

 

PE

LEVEL

RECTY

 

 

E

 

FINALIZ

 

 

EDIT

 

 

MIC

 

 

Programming track numbers

You can select tracks and store them either in the CD changer or CD recorder memory. If you use the program for playback you can choose one of the two memories, else if you like to specify tracks for recording, use the CD changer memory only! You can store any track more than once.

1Load the desired disc(s) in the disc tray(s).

2Press either CD 1, CD 2, CD 3, or CDR to select the disc.

3Press PROG on the set (PROGRAM on the remote control). yPROG starts blinking and Program is displayed.

4If either CD 1, CD 2 or CD 3 is selected: Rotate í JOG CONTROL ë to select either:

yCD1 (or 2, 3) All: All tracks of CD 1 (or 2, 3) will be programmed.

yCD1 (or 2, 3) and track number: The track number of CD 1 (or 2, 3) will be programmed.

If CDR is selected:

Rotate í JOG CONTROL ë (press the numerical keys on the remote control; for 2-digit numbers, press the keys in rapid succession) to select a track number.

5Press YES to store your selection in the memory.

yThe number of programmed tracks (STEP), Prog and the total program time are displayed. The track number blinks in the music calendar.

6Select and store all desired tracks in this way.

7Press PROG on the set (PROGRAM on the remote control) to end programming.

yPROG stays shown and the program is currently available.

Note: If the maximum number of programmable tracks is reached, the display shows Program full.

Erasing a track from the program

1If necessary press Ç STOP on the set (Ç on the remote control) to stop playback.

2Press either CD 1, CD 2, CD 3, or CDR to select the desired memory.

3Press PROG (PROGRAM on the remote control), followed by à SEARCH or á SEARCH (à or á on the remote control) to move through the program steps.

yThe track number at the selected step and the total program time are displayed.

4Press NO to remove the track from the program. yCleared is displayed briefly.

yThe next programmed track number will move up to this position and is displayed together with the step number and the remaining total program time.

Clearing the program

1If necessary press Ç STOP on the set (Ç on the remote control) to stop playback.

2Press NO.

yClear Prog? is displayed.

3Press YES to clear the program.

yProg Cleared will be displayed and PROG goes off.

Note: When you open the CD recorder tray or the CD changer tray the respective program will be cleared.

Making a program for recording

1Select and store all desired tracks in the CD changer memory (see “Programming track numbers”).

2Enter the recording menu (see “Internal recording”).

•If the total time of the program is of bigger size than the remaining recording time of the CDR(W):

yNot fitting! will be displayed briefly, followed by

the remaining recording time and Record Prog? If you nevertheless start recording, only those tracks of the program that fit onto the CDR(W) will be recorded in entirety.

•To change the program press NO.

yEdit Program will be displayed briefly, PROG and the time of the program start blinking. Now you can change the program (see “Programming track numbers”, “Erasing a track from the program” and “Clearing the program”).

English

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents FW-R8 Italia How to connect a plugImportant notes for users in the U.K Mains plug Copyright in the U.KDeutsch Español Français English General Information English Discs for playback CD recorders, when finalizedDiscs for recording Cdrw handlingUse only the original Controls and ConnectionsOn the back After all otherOn the front £ RecordIncredible Surr Antenna connections InstallationEnglish Mains Speaker connectionsConnecting a subwoofer Analogue audio connectionsDigital audio connections Remote Control English Remote control buttonsRemote control batteries Display Information areaStatus lights and flags Playing a Cdrw Switching on, switching to standbyBasic Functions Loading the CD changer, CD recorderMute Demo modeEnglish Sound control LoudnessCD text Selecting a disc on the CD changerSelecting a track and searching Shuffle and RepeatClearing the program ProgramProgramming track numbers Erasing a track from the programAuto Level Control ALC About RecordingEnglish Basic information Direct Line Recording DLRNormal recording and listening Internal RecordingRecording modes High speed recordingNormal recording and listening High speed recordingManual microphone recording Manual recordingManual recording from the FM tuner Press Ç Stop to stop recordingIf a digital source is selected External RecordingAnalogue or digital recording? Recording with automatic startIf Mic Only is selected YUpdate is displayedManual recording from an external source If AUX Mix Mic is selectedFinalizing Cdrw discs Manual finalizing when recording is in progressManual finalizing when recording is stopped English Automatic track incrementErasing one or more tracks UNFINALIZING, ErasingUnfinalizing Cdrw discs Erasing from a Cdrw discIf you want to substitute the character FeaturesEdit Text on CD recorder only If you want to delete the character Press noClearing the track edit Track editing on CD changer onlyErasing text Erasing from the memoryAutomatic programming Tuning to radio stationsTuning to preset stations Storing radio stationsSwitching through different RDS information TunerStation name Radio text messages RDS clock Tune to an RDS station see Tuner Clock settingAutomatic clock setting Manual clock settingEnglish Record timer CLOCK/TIMERAlarm timer Switching the alarm and record timer on/offTechnical Data This device, due to possible eye injury This unit employs a laser. Only a qualified service3103 306 English Français Español Deutsch
Top Page Image Contents