Philips FW-R8 Important notes for users in the U.K Mains plug, How to connect a plug, Italia

Page 2

Important notes for users in the U.K.

Mains plug

This apparatus is fitted with an approved 13 Amp plug. To change a fuse in this type of plug proceed as follows:

1Remove fuse cover and fuse.

2Fix new fuse which should be a

BS1362 5 Amp, A.S.T.A. or BSI approved type.

3Refit the fuse cover.

If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place. If the mains plug contains a fuse, this should have a value of 5 Amp. If a plug without a fuse is used, the fuse at the distribution board should not be greater than 5 Amp.

Note: The severed plug must be disposed of to avoid a possible shock hazard should it be inserted into a 13 Amp socket elsewhere.

How to connect a plug

The wires in the mains lead are coloured with the following code: blue = neutral (N), brown = live (L).

As these colours may not correspond with the colour markings identifying the terminals in your plug, proceed as follows:

•Connect the blue wire to the terminal marked N or coloured black.

•Connect the brown wire to the terminal marked L or coloured red.

•Do not connect either wire to the earth terminal in the plug, marked E (or e) or coloured green (or green and yellow).

Before replacing the plug cover, make certain that the cord grip is clamped over the sheath of the lead - not simply over the two wires.

Copyright in the U.K.

Recording and playback of material may require consent. See Copyright Act 1956 and The Performer’s Protection Acts 1958 to 1972.

Italia

DICHIARAZIONE DI CONFORMITA’

Si dichiara che l’apparecchio FW-R8 Philips risponde alle prescrizioni dell’art. 2 comma 1 del D. M. 28 Agosto 1995 n. 548.

Fatto a Eindhoven

Philips Consumer Electronics

Philips, Glaslaan 2

5616 JB Eindhoven, The Netherlands

Norge

Typeskilt finnes på apparatens bakside.

Observer: Nettbryteren er sekundert innkoplet. Den innebygde netdelen er derfor ikke frakoplet nettet så lenge apparatet er tilsluttet nettkontakten.

For å redusere faren for brann eller elektrisk støt, skal apparatet ikke utsettes for regn eller fuktighet.

2

Image 2

Contents FW-R8 Copyright in the U.K How to connect a plugImportant notes for users in the U.K Mains plug ItaliaDeutsch Español Français English General Information Cdrw handling CD recorders, when finalizedDiscs for recording English Discs for playbackAfter all other Controls and ConnectionsOn the back Use only the originalIncredible Surr On the front£ Record Speaker connections InstallationEnglish Mains Antenna connectionsDigital audio connections Connecting a subwooferAnalogue audio connections Remote control batteries Remote ControlEnglish Remote control buttons Status lights and flags DisplayInformation area Loading the CD changer, CD recorder Switching on, switching to standbyBasic Functions Playing a CdrwLoudness Demo modeEnglish Sound control MuteShuffle and Repeat Selecting a disc on the CD changerSelecting a track and searching CD textErasing a track from the program ProgramProgramming track numbers Clearing the programDirect Line Recording DLR About RecordingEnglish Basic information Auto Level Control ALCHigh speed recording Internal RecordingRecording modes Normal recording and listeningHigh speed recording Normal recording and listeningPress Ç Stop to stop recording Manual recordingManual recording from the FM tuner Manual microphone recordingRecording with automatic start External RecordingAnalogue or digital recording? If a digital source is selectedIf AUX Mix Mic is selected YUpdate is displayedManual recording from an external source If Mic Only is selectedEnglish Automatic track increment Manual finalizing when recording is in progressManual finalizing when recording is stopped Finalizing Cdrw discsErasing from a Cdrw disc UNFINALIZING, ErasingUnfinalizing Cdrw discs Erasing one or more tracksIf you want to delete the character Press no FeaturesEdit Text on CD recorder only If you want to substitute the characterErasing from the memory Track editing on CD changer onlyErasing text Clearing the track editStoring radio stations Tuning to radio stationsTuning to preset stations Automatic programmingStation name Radio text messages RDS clock Switching through different RDS informationTuner Manual clock setting Clock settingAutomatic clock setting Tune to an RDS station see TunerSwitching the alarm and record timer on/off CLOCK/TIMERAlarm timer English Record timerTechnical Data This unit employs a laser. Only a qualified service This device, due to possible eye injuryEnglish Français Español Deutsch 3103 306