Philips FW-R8 manual Installation, English Mains, Speaker connections, Antenna connections

Page 8

INSTALLATION

English

Mains

The type plate is located on the rear of the set.

1Check whether the mains voltage as shown on the type plate corresponds to your local mains voltage. If it does not, consult your dealer or service organisation.

2Make sure all connections have been made before switching on the mains supply.

3Connect the mains cable supplied to AC MAINS ~ and to the wall socket. This switches on the mains supply.

For optimal performance use only the original mains cable.

When the set is switched to standby, it is still consuming some power. To disconnect the set from the mains completely, remove the mains plug from the wall socket.

For users in the U.K.: please follow the instructions on page 2.

To avoid overheating of the set a safety circuit has been built in. Therefore your set may disconnect under extreme conditions. If this happens, switch the set off and let it cool down before reusing it.

Speaker connections

The speaker connections are click-fit connectors. Use them as shown below.

Antenna connections

AM antenna

The loop antenna supplied is for indoor use only.

1Fit the plug of the loop antenna to AM AERIAL as shown below.

2Position the antenna as far away as possible from the TV, a VCR and other radiation sources.

3Turn the antenna for optimum reception.

AM

AERIAL

FM antenna

The wire antenna supplied can only be used to receive nearby stations. For better reception we recommend using a cable antenna system or an outdoor antenna.

1Fit the supplied wire antenna to FM AERIAL 75 Ω as shown below.

2Move the antenna in different positions for optimum reception.

•If you are using a cable antenna system or an outdoor antenna, fit the antenna plug to FM AERIAL 75 Ω instead

of the wire antenna.

1Connect the coloured (or marked) wire to the red terminal and the black (or unmarked) wire to the black terminal.

2Connect:

–Left speaker to L (red and black)

–Right speaker to R (red and black)

	FM	AERIAL
		75	Ω

	FM	AERIAL
		75	Ω

8

Image 8

Contents FW-R8 How to connect a plug Important notes for users in the U.K Mains plugCopyright in the U.K ItaliaDeutsch Español Français English General Information CD recorders, when finalized Discs for recordingCdrw handling English Discs for playbackControls and Connections On the backAfter all other Use only the originalIncredible Surr On the front£ Record Installation English MainsSpeaker connections Antenna connectionsDigital audio connections Connecting a subwooferAnalogue audio connections Remote control batteries Remote ControlEnglish Remote control buttons Status lights and flags DisplayInformation area Switching on, switching to standby Basic FunctionsLoading the CD changer, CD recorder Playing a CdrwDemo mode English Sound controlLoudness MuteSelecting a disc on the CD changer Selecting a track and searchingShuffle and Repeat CD textProgram Programming track numbersErasing a track from the program Clearing the programAbout Recording English Basic informationDirect Line Recording DLR Auto Level Control ALCInternal Recording Recording modesHigh speed recording Normal recording and listeningHigh speed recording Normal recording and listeningManual recording Manual recording from the FM tunerPress Ç Stop to stop recording Manual microphone recordingExternal Recording Analogue or digital recording?Recording with automatic start If a digital source is selectedYUpdate is displayed Manual recording from an external sourceIf AUX Mix Mic is selected If Mic Only is selectedManual finalizing when recording is in progress Manual finalizing when recording is stoppedEnglish Automatic track increment Finalizing Cdrw discsUNFINALIZING, Erasing Unfinalizing Cdrw discsErasing from a Cdrw disc Erasing one or more tracksFeatures Edit Text on CD recorder onlyIf you want to delete the character Press no If you want to substitute the characterTrack editing on CD changer only Erasing textErasing from the memory Clearing the track editTuning to radio stations Tuning to preset stationsStoring radio stations Automatic programmingStation name Radio text messages RDS clock Switching through different RDS informationTuner Clock setting Automatic clock settingManual clock setting Tune to an RDS station see TunerCLOCK/TIMER Alarm timerSwitching the alarm and record timer on/off English Record timerTechnical Data This unit employs a laser. Only a qualified service This device, due to possible eye injuryEnglish Français Español Deutsch 3103 306