10 Update MIX
MIX is controlled by an internal program called firmware. Newer versions of the firmware may have been released after you have purchased MIX.
The software program called Philips Device Manager can use your computer to check for firmware updates that are available on the Internet.
Install Philips Device Manager on your computer from MIX or download the latest version from www.philips.com/support.
Note
•• Your music files are not affected by a firmware update.
Manually verify / update firmware
1 Ensure that your computer is connected to the Internet.
2 Connect MIX to the computer (see section Connect MIX to a computer for instructions).
3 On your computer, click Start > Programs > Philips > Philips MP3 player > GoGear SA2MXX Device Manager to launch the Philips Device Manager to launch Philips Device Manager.
4 Click Update
»» Philips SA2MXX Device Manager checks for updates and installs new firmware from the Internet, if available.
5 When the display shows Update completed, click OK.
6 Disconnect MIX from the computer. »» MIX restarts after the firmware is updated and is ready for use again.
E n g l i s h
EN 15