Philips SA2MXX04 Connect and charge, Software loaded on the MIX, Files loaded on the MIX

Page 9
Select My Computer (Windows XP / Windows 2000) / Computer (Windows Vista / Windows 7).
Right click on the Philips GoGear MIX icon.
Select Install Philips Device Manager.
Follow the on-screen instructions to complete the installation of the software.
EN
Select Philips Device Manager.
Follow the on-screen instructions to complete the installation of the software.

Connect and charge

MIX has a built-in battery that can be charged through the USB port of a computer.

Connect MIX to a computer

1 Slide out the integrated USB plug of MIX.

2 Connect the USB plug to a spare USB port on your computer.

3 Turn on your computer. »» MIX charges.

Note

•• For first-time use, allow MIX to charge for 3 hours.

•• The charging animation stops and the icon is displayed when the charging process is completed.

When you connect the MIX to the PC for the first time, a pop-up window appears:

1

2

Note

•• The installation requires you to agree to the license terms.

If the pop-up window is not displayed automatically:

1

2

3

4

Note

•• The installation requires you to agree to the license terms.

Battery level indication

The display indicates the approximate levels of the battery status as follows:

100% 75% 50% 25% 0%

»» A flashing battery screen indicates that the battery is low.The player saves all settings and switches off within 60 seconds.

Note

•• Rechargeable batteries have a limited number

of charge cycles. Battery life and number of charge cycles vary by use and settings.

•• The charging animation stops and the

icon is displayed when the charging process is completed.

Tip

•• You can conserve battery power and increase the play time of MIX if you ensure that the shortest timer setting is selected. (To check/ adjust the timer settings, go to > [Display Settings] > [Screen off timer].)

Software loaded on the MIX

MIX comes with the following software:

Philips Device Manager (helps you get firmware updates for MIX)

Files loaded on the MIX

The following files are loaded on MIX:

User manual

8

Image 9
Contents SA2MXX02 SA2MXX04 Contents General maintenance About operating and storage temperaturesTo establish a safe volume level Compliance with copyright laws remains your responsibility Be responsible! Respect copyrightsData logging Monkey’s Audio decoderPermission Recycling the productG l i s h What’s in the box Your new MIXGetting started Limit the volumeOverview of the controls and connections Overview of the main menuSoftware loaded on the MIX Connect and chargeFiles loaded on the MIX If the pop-up window is not displayed automaticallyMIX has a lock switch to prevent accidental operation Turn MIX on and offAutomatic standby and shut- down Music Listen to musicFind your music Play a preset radio station Auto-tune radio station presetsRadio Listen to FM radioRecord audio/voices RecordingsListen to recordings Delete one or more recordingsThis is how you use MIX to store and carry data files Use the MIX to carry data filesEqualizer deactivates when FullSound is selected SettingsPress 2 to set Traditional ChineseUpdate MIX Manually verify / update firmwareClick Update Troubleshooting Turn off MIX before you continueRestart MIX System requirements Technical dataDecibel dB GlossaryKoninklijke Philips Electronics N.V