GUIDE TO OPERATION
(4) Fan speed selection
Press FAN button. For each press, fan speed changes as follows:
LO | MED | HI | AUTO |
|
|
| AUTO |
Unit runs at the speed displayed on LCD.
In HEAT mode, warm air will blow out after a short period of time due to
In DRY mode, when room temp. becomes 2
C higher than temp. setting, unit will run intermittently at LO speed regardless of FAN setting.
COOL operation starts when room |
|
temp. is higher than temp. setting. | |
|
Temp. setting+2 
C
Temp. setting
On reaching temp. setting,unit will run in mild DRY mode.
(5) Air flow direction adjust
After operation mode is selected, vertical flap will open automatically according to the mode.
(6) Unit stop
Press ON/OFF button.
Only time remains on LCD.
All indicators on indoor unit go out.
Vertical flap closes automatically.
Hints
As cold air flows downward in COOL mode, adjusting air flow horizontally will be much more helpful for a better air circulation.
As warm air flows upward in HEAT mode, adjusting air flow downward will be much more helpful for a better air circulation.
Be careful not to catch a cold when cold air blows downward.
It is harmful to your health in summer to go frequently in and out of places where temp. difference is above 7
C . Temp. difference of 
C
More than this, unit's load can be reduced and power consumption cut down as well. So, you'd better set a temp. diff of 
C
12