GUIDE TO OPERATION
Adjusting up/down air flow direction
Up/down direction can be adjusted by using the SWING button on the remote controller. Each time pressing this button, the mode changes in the following sequence.
SWING 
No indication (louver stopped)
Change to the AIRFLOW mode.
LOUVER STOPPED
SWING
When the LOUVER button is pushed during SWING mode, it stops swinging at the just angle.
Louver moves in upward and downward directions continuously.
CAUTION
Avoid direct air flow to the body for many hours.
Avoid downward blowing operation of cooling mode for many hours.
Do not touch the swing louver during swing operation.
Please use the Swing button of remote controller. If adjusted by hand, it would cause an injure.
(Only for 28,42 series.)
Recommendable stopping angle of the louver
COOL |
|
and |
|
DRY | (Horizontal Blowing) |
|
HEAT
(Downward Blowing)
15