Haier HCFU-18C13, HCFU-28C13, HCFU-42CA13 operation manual Timer ON-OFF

GUIDE TO OPERATION

TIMER ON-OFF

(1)After unit start, select your desired operation mode

Operation mode will be displayed on LCD.

Power indicator on indoor unit lights up.

(2)Press TIMER button to change TIMER mode

Every time the button is pressed, display changes as follows:

ON	OFF	ON	OFF	blank
TIMER ON	TIMER OFF	TIMER ON-OFF

Select TIMER ON-OFF, "ON" will flash.

(3)Time setting for TIMER ON

Press HOUR button.

Every time the button is pressed, time increases 10min. If button is kept depressed, time will change quickly.

Every time the button is pressed, time decreases 10min. If button is kept depressed, time will change quickly. Time will be shown on LCD.

It can be adjusted within 24hours.

AM refers to morning and PM to afternoon.

(4)Time confirming for TIMER ON

After time setting, press TIMER button to confirm. "ON" stops blinking, While "OFF" starts blinking. Time displayed: Unit starts at X hour X min.

(5)Time setting for TIMER OFF

Follow the same procedures in "Time setting for TIMER ON".

(6)Time confirming for TIMER OFF

After time setting, press SET button to confirm "OFF" stops flashing. Time displayed: Unit starts at X hour X min.

ON	OFF
AM	PM

TEMP

		ON
	SWING	OFF	FAN
		1
	MODE
			3
	CLOCK		SET	6
	TIMER		SLEEP
2	LOCK	4RESET	5

To cancel TIMER mode

Just press TIMER button several times until TIMER mode disappears.

According to the Time setting sequence of TIMER ON or TIMER OFF, either Start-Stop or Stop-Start can be achieved.

14