Preparations
FM wire antenna
speaker | speaker |
(right) | (left) |
English
Rear connections
The type plate is located at the rear of the system.
APower
– Before connecting the AC power adaptor to the wall outlet, ensure that all other connections have been made.
WARNING!
–For optimal performance, use only the original power cable.
–Never make or change any connections with the power switched on.
To avoid overheating of the system, a safety circuit has been built in. Therefore, your system may switch to Standby mode automatically under extreme conditions. If this happens, let the system cool down before reusing it (not available for all versions).
BAntenna Connection
FM Antenna
The wire antenna supplied can only be used to receive nearby stations. For better reception we recommend using a cable antenna system or an outdoor antenna.
1Extend the wire antenna and fit it to FM ANTENNA as shown below.
Note: If you are using a cable antenna system or an outdoor antenna, fit the antenna plug, instead of the wire antenna, to FM ANTENNA .
2Move the antenna in different positions for optimal reception (as far away as possible from the TV,VCR or other radiation sources).
3Fix the antenna’s end to the wall.
11