Basic Functions
IMPORTANT:
Before you operate the system, complete the preparation procedures.
Plug and Play (for tuner installlation)
Plug and Play allows you to store all available radio stations automatically.
To reinstall Plug and Play
1In standby mode, press and holdÉÅ on the system until "AUTO INSTALL - PLEASE PRESS PLAY, STOP CANCEL" is displayed.
2Press ÉÅ again to start installation.
➜ All previously stored radio stations will be replaced.
To exit without storing the Plug and Play
●Press 9 on the system.
➜ If you do not complete the Plug and Play installation, the function will be restarted when you next turn on the main supply again.
Notes:
–If no stereo frequency is detected during Plug and Play, "CHECK ANTENNA" will be displayed.
English
First time setup/power up
1When you turn on the main supply, "AUTO INSTALL - PLEASE PRESS PLAY, STOP CANCEL" is displayed.
2Press ÉÅ on the system to start installation.
➜"PLUG AND PLAY" .... "INSTALL" is displayed, followed by "TUNER" and "AUTO".
➜PROG starts flashing.
➜The system will automatically store the radio stations (FM only ) with sufficient signal strength.
➜When all the available radio stations are stored or the memory for 40 presets are used, the last preset radio station will be played.
15