Philips DC177 Adjusting volume and sound, Switching the system on, Power-saving automatic standby

English

Basic Functions

Adjusting volume and sound

1 Turn the VOLUME control anti-clockwise to decrease or clockwise to increase volume on the system (or press VOL -/+on the remote control).

➜ Display shows the volume level VOL and a number from MIN, 1-31, MAX.

2 Press DSC repeatedly to select the desired sound effect: POP / JAZZ / CLASSIC / ROCK.

3 Press DBB (or DBB/LOUD on the remote control) to switch bass enhancement on or off.

➜ Display shows if the DBB is activated.

Switching the system on

●Press STANDBY ON or SOURCE (or 2on the remote control).

➜The system will switch to the last selected source.

●Press iPod, USB, FM or AUX on the remote control.

➜The system will switch to the selected source.

To switch the system to standby mode

●Press STANDBY ON on the system (or 2on the remote control).

➜The display displays clock time, or --: -- is displayed if clock time is not set.

➜The volume level (up to a maximum volume level of 12 and up to a minimum level of 4), interactive sound settings, last selected source and tuner presets will be retained in the player's memory.

To switch the system to Eco-power standby mode

●Press and hold STANDBY ON (y on the remote control) for more than 2 seconds.

➜The display will go blank.

➜The Eco power light will be on.

Power-saving automatic standby

The power-saving feature automatically switches to standby 15 minutes after a USB playback has ended and no control is operated.

4Press and hold DBB/LOUD on the remote

control to enable/disable LOUDNESS feature.

●LOUDNESS feature enables the system to automatically increase the treble and bass sound effect at low volume (the higher the volume, the lower the treble and bass increase).

5Press MUTE on the remote control to interrupt sound reproduction instantly.

➜ Playback will continue without sound.

●To activate sound reproduction you can:

–press MUTE again;

–adjust the volume controls;

–change source.