USB Connection | AUX |
INFORMATION REGARDING USB DIRECT:
1.Compatibility of the USB connection on this micro system:
a)This micro system supports most USB Mass storage devices (MSD) that these devices are compliant to the USB MSD standards.
i)Most common Mass storage class devices are flash drives, memory sticks, jump drives and etc.
ii)If you see a "Disc Drive" showing up on your computer after you have plugged the mass storage device into your computer, most likely it is MSD compliant and it will work with this micro system.
b)If your Mass storage device requires a battery/power source, please make sure you have a fresh battery in it or charge the USB device first and then plug it into the micro system again.
2.Supported Music type:
a)This device only supports unprotected music with file extension: .mp3 .wma
b)Music bought from
c)File name extensions that ended with the following are not supported: .wav; .m4a; .m4p;
.mp4; .aac and etc.
3.No Direct connection can be made from a Computer USB port to the micro system even you have either or both mp3 or wma file in your computer.
Listening to an external source
You can listen to the sound of the connected external device through your system’s speakers.
Using AUX IN (3.5 mm jack )
1Use a cinch cable (not supplied) to connect AUX IN jack of the main unit (3.5 mm, located on the back panel) to an AUDIO OUT or headphone jack on an external equipment (such as CD player, or VCR).
2Press SOURCE (or AUX on the remote control) repeatedly until “AUX 1” is displayed.
Using AUX IN 2 (white/red jacks)
1Use the audio cables (white/red, not supplied) to connect AUX IN 2 (L/R) jacks of the main unit (located on the back panel ) to the corresponding AUDIO OUT jacks on an external device (such as TV or VCR).
2Press SOURCE (or AUX on the remote control) repeatedly until “AUX 2” is displayed.
English
21