Philips 1 manual Installation Connecting to video equipment, Optional

7. Installation	Connecting to video equipment
Connecting to video equipment
Note: The figures in brackets (1) correspond to the figures in the	S-VHS
accessories diagram.	(c)	(e)
The characters in brackets (a) correspond to the
characters in fig. 4 of ‘Controls and connections’.

Caution!

Audio out

USB

RL Audio in RL

Video

S-Video

DataDataoutin

DaD

Always switch off the projector before making any connections.

PAL, NTSC, SECAM

(c)

(d)

Audio out

USB

RL Audio in RL

Video

S-Video

DataDataoutin

DataDataoutin

Projector

(2) (optional)

			(3)
Projector			S-Video
(2)
	Video	S-Videoi	Scart adapter
VCR		R Audio L	(not for USA
	out	out
			version)
(3)

VCR	RL Audio RL	Video	Scart adapter
			(not for USA
	out	out
			version)

1.Connect the Video out socket of a VCR, Laser Disc player, video camera or TV to the Video socket (d) of the projector. For this, use the video/audio connection cable (2) supplied.

2.Connect the Audio OUT L/R sockets of the VCR, Laser Disc player, video camera or TV to the Audio in L/R sockets (c) of the projector.

For this, use video/audio connection cable (2) supplied. Insert the white plug into the L socket and the red plug into the R socket.

In case your VCR, Laser Disc player, video camera or TV is equipped with a Scart connector (depending on region):

1.Connect the Scart/RCA Audio Video adapter (3) supplied to the Scart connector of the VCR, Laser Disc player, video camera or TV.

2.Plug the video/audio connection cable (2) supplied into both the adapter and the Video (d) and Audio in L/R sockets (c) of the projector.

1.Connect the S-Video out socket of a S-VHS video recorder, Laser Disc player, video camera or TV to the S-Video socket

(e)of the projector.

For this use an (optional) S-vVideo connection cable.

2.Connect the Audio out L/R sockets of the S-VHS video recorder, Laser Disc player, video camera or TV to the Audio in L/R sockets (c) of the projector.

For this, use the red and white audio connectors of the audio/video connection cable.

Insert the white plug into the L socket and the red plug into the R socket.

In case your VCR, Laser Disc player, video camera or TV is equipped with a Scart connector (depending on region):

1.Connect the Scart/RCA Audio Video adapter (3) supplied to the Scart connector of the VCR, Laser Disc player, video camera or TV.

2.Plug the audio/video connection cable (2) supplied into both the adapter and the Audio in L/R sockets (c) of the projector. Insert the white plug into the L socket and the red plug into the R socket.

3.Plug an (optional) S-Video connection cable into the VCR and the S-Video socket (e) of the projector.

12