5. Functional Overview | See illustrations |
|
|
Controls
On projector (fig. 1)
1Menu
To activate and deactivate the menu.
2Cursor Control
To manipulate the mouse cursor on the connected computer as long as the menu is not active. When the menu is active the Cursor Control controls the menu cursor. The cursor control works with up/down and left/right button operation.
Notes:
–The Cursor Control can only function as a mouse cursor when the USB socket of the projector is connected to the USB downstream terminal of the computer.
–When the Digital Zoom is active, the Cursor Control gives direct access to the Panning function to select the enlarged area.
3A(udio)/V(ideo) Mute
To mute the sound of the projector (or an externally connected sound amplifier) and to mute the picture.
4Standby On
To switch the projector in or out of the power standby mode. When the projector is in standby mode, the ring around the button lights up red. When the projector is operating, the ring is white.
5OK
To confirm actions in the menu when the menu is on screen.
6Source
To select the current projection source (Data,
7
Keystone 
To correct picture distortion of the vertical keystone type by digital scaling.
8Lamp indicator
–Slowly flashes green when the lamp is starting up
–Lights up green when the lamp is on
–Slowly flashes orange when the lamp is starting up and lamp life expires within the next 100 hours or has expired
–Lights up orange when the lamp is on and lamp life expires within the next 100 hours or has expired
–Lights up red when the lamp start has failed
9R(emote) C(ontrol) indicator
Flashes green when the remote control is operated and the projector responds.
0Zoomring
To adjust the size of the projected image.
!Focus ring
To adjust the focus of the projected image.
@Height/Level adjusters
To adjust the vertical and/or horizontal angle of the projector.
#Lens cap
To protect the lens when the projector is not in use.
$IR sensor
To receive the signals from the remote control.
On compact remote control (SVGA/XGA version) - (fig. 2)
1Stand by On
To switch the projector in or out the the power standby mode.
2Mouse Left/Right
Function as the Left and Right mouse buttons of your PC.
3– Volume +
To adjust the volume.
4Menu
To activate and
5Mute
To mute the sound of the projector (or an externally connected sound amplifier).
6Source
To select the current projection source (Data,
7
To capture a moving picture. The button toggles between the Freeze mode and the display situation.
8
To switch the Digital Zoom function ‘On’ or ‘Off’ (toggle button). In ‘On’ condition, the image is magnified with the zoom factor chosen under Magnification in the menu and the Cursor Control can be used to select the enlarged area (Panning).
9A(udio)/V(ideo) Mute
To mute the sound of the projector (or an externally connected sound amplifier) and to mute the picture.
0Cursor Control
To manipulate the mouse cursor on the connected computer as long as the menu is not active. When the menu is active the Cursor Control controls the menu cursor. The cursor control works with up/down and left/right button operation.
Notes:
–The Cursor Control can only function as a mouse cursor when the USB socket of the projector is connected to the USB downstream terminal of the computer.
–When the Digital Zoom is active, the Cursor Control gives direct access to the Panning function to select the enlarged area.
!OK
To confirm actions in the menu when the menu is on screen.
6