Philips MCI8080/12 user manual Connect the main unit and CD/DVD unit, Connect speakers

For the speaker side:

5 Connect

Connect the main unit and CD/DVD unit

•As shown, plug the cable into DVD CABLE IN.

Connect speakers

Note

•Ensure that the colors of the speaker wires and terminals are matched.

•For optimal sound, use the supplied speakers only.

•Connect only speakers with impedance that is the same or higher than the supplied speakers. Refer to the Specifications section of this manual.

For the main unit side:

1	Hold down the socket flap.		English
2	Insert the stripped part of the wire
	completely.
	•	Insert the right speaker wires to “R”,
		left speaker wires to “L”.
	•	Insert the red wires to “+”, black
		wires to “-”.

3Release the socket flap.

a b c

4Unscrew the speaker connectors.

5For the left speaker, identify the speaker cable that is connected to the left connectors on the main unit.

6Insert fully the red end of the speaker cable into the red (+) connector.

7Screw the red (+) connector to secure the cable.

8Insert fully the silver end of the speaker cable into the black (-) connector.

9Screw the black (-) connector to secure the cable.

10 Repeat steps 2-6 for the right speaker.

a b c

EN 21