2Connect MCi8080 as you did in the
Device name
In [Device name], you can name/rename your MCi8080. On a connected UPnP server/client, the MCi8080 can be found as named.
1From Home screen, go to [Settings] > [Network settings] > [Device name].
2In [Device name], press/to select the entry location; press/ repeatedly to select desired letters.
USB sharing
When you connect MCi8080 to home Wi- Fi/wired network, the HDD connected to MCi8080 can work as a shared disk of the network. Contents on the HDD can be played or shared on computers or UPnP devices that are also connected to the network.
•To permit or prohibit the sharing, go to [Settings] > [Network settings] > [USB sharing]. Press OK to turn on or off the sharing.
Location and time zone
After the
According to the selected location and time zone, MCi8080 can
•Set clock automatically over the Internet (see
•
Language
After the
Device information
From the home screen, go to [Settings] > [Device ID and information].You can learn about information about MCi8080, including model number, name to be shown on a UPnP server/client, software version and network settings.
Check for software upgrades
On the MCi8080, you can check for software upgrades.After you click to agree to the terms and conditions, the downloading and installation of new upgrades start automatically.
1Ensure that MCi8080 is connected to the Internet.
2From Home screen, go to [Settings] > [Check for software upgrades].
Demo mode
After the
1From Home screen, go to [Settings] >
[Demo mode].
» Demo play starts.
2To exit the demo play, press.
» The unit is switched to Eco standby.
60EN