Philips MCI8080/12 user manual Sleep timer, Date and time

To play a song or Internet radio station as the next alarm sound

1Ensure that you have selected [Music] in the Step 3 above;

2Before you turn off MCi8080, or switch MCi8080 to active standby,

•Go to [Media Library], and select and play the desired song;

•Or, go to [Internet Radio], and tune to the desired station.

Use the alarm

At the set alarm time, music/Internet radio plays as desired, or the buzzer sounds.

Note

•The alarm sounds even if you have switched MCi8080 to active standby or Eco standby.

•The buzzer sounds instead, if MCi8080 fails to connect to a music library or an Internet radio station.

•MCi8080 is unmuted if it has been muted.

•The alarm sounds in a higher volume if the volume level is lower than minimum.

To snooze the alarm

•Press any button on the unit or the remote control (except for the volume buttons).

»The alarm sounds again 15 minutes later.The alarm icon remains.

To stop the alarm

•Press and hold or .

»The alarm is stopped.The alarm icon disappears.

»The alarm sounds again next day.

To turn off the alarm

•Go to [Settings] > [Clock settings] > [Alarm]. Select [Alarm off] and press OK on the remote control.

Sleep timer

With the sleep timer, you can have MCi8080 turned off automatically after the set timer duration.

To set the time duration

1From the home screen, go to [Settings] > [Clock settings] > [Sleep timer].

•Or, press SETTINGS on the remote control to enter [Settings].

2Select an option. Press OK to turn it on.

Date and time

The date and time can be set automatically or manually.

Automatic setting

For automatic clock setting, use the online service over the Internet, or use the time signal from FM RDS radio.

Through the online service over the Internet

1Turn on the unit, if necessary.

•Ensure that the unit is connected to the home Wi-Fi/wired network and Internet.

2From Home screen, select [Settings] > [Clock settings] > [Date and time].

•Or, press SETTINGS on the remote control to enter [Settings].

3In [Date and time], select [Current date and time] > [Automatic (Internet)].

»The unit starts auto time setting over the Internet.

»A message appears when the setting is done.

58EN