Philips MCI8080/12 user manual Wireless WiFi Wired Ethernet, Wired connection

•To enter the desired digits, use the alphanumeric buttons on the remote control; or press / repeatedly.

Note

•Ensure that you never enter an IP address that is already assigned to a computer/device on the network.

Wired connection

MCi8080

Connect to the router by using the Ethernet cable

1Select [Yes], when asked whether to set up network connection (see ‘First-time setup’).

2Use an Ethernet cable to connect the unit to the router.

12V=1A To Modem LAN4 LAN3 LAN2 LAN1 Reset

Connect to the home Wi-Fi/wired network

•On the unit, select [Wired (Ethernet)].

»The unit starts to acquire an IP address assigned by the network automatically.

»A message appears when the connection is completed successfully.

2/2

Wireless (WiFi)

Wired (Ethernet)

Tip

•The router may fail to assign an IP address, if the DHCP (Dynamic Host Configuration Protocol) is unavailable or disabled on the router. You may need to enter the IP address manually, or press BACK to start re- connecting.

Connect to the Internet

•Connect to the Internet as prompted.

»You enter Home screen after the first- time setup is complete.

MCi8080

Internet

Note

•Ensure that the router connects to the Internet directly and no dial-up is required on the computer.

English

EN 31