Operating the Device
1. Power On/Off
Slide the Master Power Switch to the “On” position, the Player will turn on and immediately start playing music.
You can leave the Master Power Switch in the “ON” position all the time, and use the (►II) key to turn the Player on and off, to do this, hold down this key for 7 seconds.
2. Playing Music
Press the (►II) key to play. Press it again to pause.
Press and hold the () key to skip to the next song.
Press and hold the () key to go back to the previous song.
3. Volume Adjustment
When listening to music, you can press the (+) or
4. Charging the Battery
Connect the Player to your computer via the supplied USB cable. Leave your system on and the Player connected for 2 hours to charge the battery. The indicator light will flash until battery is charged.
Note: Keep the master power switch in the ‘On’ position while charging the device
5. File Transfer
An easy way to understand this process is to think of the MP3 Player as a place to store files, much like a USB memory stick. All you need to do is transfer MP3 and WMA music files to the device from your computer. The MP3 Player by default will be displayed as a “Removable Disk” on your computer.
You can use the file explorer on your computer to move files onto your MP3 Player. Here are the steps:
1.Connect the Player to your computer.
2.Wait for your computer to detect and recognize the Player.
3.Open the “Removable Disk” drive from My Computer (or Computer).