Turn iPod mode on
1.Set the Audio Source switch to iPod.
2.Set the Power / Function switch to ON.
Using your iPod
Use the controls available on your iPod (e.g., play/pause, skip next/previous, browse menus).
Turn the Volume Control dial of the CSMP120 to adjust the volume level.
Connect your device
Using a 3.5mm
Turn Aux mode on
1.Set the Audio Source switch to AUX.
2.Set the Power / Function switch to ON.
3.Use the controls of the Aux device to turn it on.
English
Listening to an Auxiliary Device
If you have a device with a 3.5mm headphone jack (e.g., CD player, MP3 player), you can play it through the speakers of this unit.
You will need a 3.5mm
Using your Aux device
Use the controls available on your Aux device (e.g., play/pause, skip next/previous, browse menus).
If possible, set the volume level of the Aux device to approximately 80%, then turn the Volume Control dial of the CSMP120 to further adjust the volume level.
Page 11 | Listening To Music (radio, Ipod, Aux) |
|
|