ÂÂListening to Music (Radio, iPod, Aux)
Listen to AM/FM radio broadcasts, or play your iPod or other auxiliary device.
Listening to the Radio
Turn the radio on
1.Set the Audio Source switch to RADIO.
2.Set the Power / Function switch to ON.
Select the radio band (AM, FM, ST)
Set the Radio Band switch to one of the following positions.
AM: Listen to AM broadcasts.
FM: Listen to FM mono broadcasts. Choose FM if the broadcast signal is weak.
ST: Listen to FM stereo broadcasts. Choose ST for the best sound quality.
Tune to a radio station
Turn the Radio Tuning dial to tune to a radio station. Adjust the antennas as necessary.
FM antenna: Extend the FM antenna wire lo- cated on the rear of the unit and position it for optimum reception.
AM antenna: The AM antenna is built into the unit. If you are having difficulty receiving an AM station, reposition the unit.
Operating the radio on a metal surface may adversely affect reception.
Do not place the unit near strong mag- nets such as those used in television sets, speaker boxes, etc. as these may cause the frequency to drift.
English
Page 9 | Listening To Music (radio, Ipod, Aux) |
|
|