ÂÂConnect and Charge the Battery
Upon initial use, the player should be charged fully to ensure optimal performance and battery life. If the player has not been used for a long period of time, the battery may need to be recharged.
With the included USB cable:
1.Connect the small end of the cable to the USB port of the player.
2.Connect the large end of the cable to an avail- able USB 2.0
When the player is connected and charging, the no- tice “USB Connected” will be displayed on the screen.
Tip
You can press <M> after the player is connected to cancel the data connection and switch to USB power mode. This will allow you to use the player normally while drawing power from the computer.
The computer must be powered on and not in sleep mode in order to charge the battery.
The player will not charge if it is connected to a
If the player is connected to the computer through a USB hub, the hub must be self- powered to charge the battery.
The battery used in this device may present a fire or chemical burn if mistreated. Do not disassemble, incinerate, or heat the battery. Do not leave the battery in a place subject to direct sunlight, or in a car with its windows closed. Do not connect the player to a power source other than that which is indicated here or on the label as this may result in the risk of fire or electric shock.
English
Page 9 | Connect And Charge The Battery |
|
|