Before Using your Mini-dock, Use | Fujitsu Stylistic 3400 specification

You may use these components as follows:

Use the	To connect


DC Input Jack	• an AC adapter to you
	mini-dock. This will provide
	power to the Stylistic 3400 and
	charge the system battery.
LAN Port	• to a local area network (LAN).
Keyboard Port	• a PS2-style keyboard.
Floppy Disk	• a Fujitsu external floppy disk
Drive Port	drive (FMWFD2).
USB Port	• a USB-compliant peripheral
	device.

Right-Hand Side Components

Following is a description of the components on the right-hand side of the mini-dock. (Figure 4.)

Eject

PCMCIA

Mouse

Line

-Out

Button

CardBus Slot

Port

Jack

Figure 4. Right-hand side components.

You may use the components as follows:

Use the	To


Eject Button	• remove the PC Card from the
	PCMCIA CardBus slot.
	To eject, press the button.
PCMCIA	• insert either a Type II or Type III
CardBus Slot	PC Card. Ensure the PC Card is
	inserted into this slot with the
	label facing up.
Mouse Port	• connect a PS2-style mouse.
Line-Out Jack	• connect powered external stereo
	speakers. The speakers built into
	the mini-dock will be disabled
	when you use this jack.
	Use the attached speakers’
	volume control knobs to adjust
	the volume to your own taste.

Before Using your Mini-dock

Your mini-dock is designed to be robust; however, the circuitry of your mini-dock, the Stylistic 3400, and connected peripheral devices can be damaged if the procedures and precautions given here are not followed.

PRECAUTIONS

To prevent damage to the pen tablet, mini-dock and peripheral devices, please observe the following guidelines.

•Do not touch connector pins or connector sockets on your equipment. Electrostatic discharge can damage interface circuitry in your equipment.

•Do not jam or force component connections.

Installing the Stylistic 3400

Follow these steps to install the Stylistic 3400 into your mini-dock.

1.Suspend the Stylistic 3400 operation by either pressing the Suspend/Resume button or by shutting down from the Start menu.

2.Turn off all peripheral devices that are already connected to the mini-dock. Disconnect the devices you do not intend to use.

3.Turn off all peripheral devices you intend to use with your Stylistic 3400, and connect them to the mini-dock.

When connecting peripherals, tighten the connector screws, if used, to maintain consistent and reliable connection between the device and the mini-dock.

4.Install the Stylistic 3400 by sliding it into the mini-dock straight down, as illustrated in Figure 5.

You should hear two clicks which indicate that the pen tablet has been properly installed. If you hear only one click, gently press the pen tablet until you hear the second click.

3/00

2 of 3

58-0712-00A

Use the