Remote control
1.PLAY / PAUSE: Play/pause
2.SKIP
3.PROGRAM: Program mode
4.STOP: Stop playback
5.SKIP +: Next track / search track forward
6.REPEAT: Repeat modes
1
2
3
4
5
6
Installation and Connections
Insert batteries into the remote control (not supplied)
1. Remove the battery compartment cover by pressing it down and sliding it out.
2. Insert 2 AAA batteries type “AAA / UM – 4“, 1.5V into the battery compartment. Please observe the correct polarity as marked with “+” and
3. Replace the cover by pushing onto the battery compartment until it snaps in.
Battery Safety Precautions
•Follow the battery manufacturer’s safety and usage instructions.
•Keep batteries away from children and pets.
•Do not throw batteries into fire. Never expose batteries to heat or fire.
•Disposal of batteries: Dispose exhausted batteries according to the local laws and regulations. For further information, please contact your disposal authority.
•Do not mix exhausted and new batteries or normal and rechargeable batteries.
•Do not mix different battery types (e.g. alkaline, zinc/carbon, rechargeable batteries). Use only batteries of the same type and size.
•During longer periods of
•Wrong usage of batteries can cause a leaking of the electrolyte and corrode the battery compartment or let the batteries burst.
Notes about the remote control:
•If the operation range of the remote control becomes smaller, the batteries are exhausted and must be replaced.
•Press the keys soft, but firm.
•Direct the remote control unit from no more than about 6 m from the remote control sensor and within an angle about 60° towards the sensor window on the front of the device.
•Do not direct bright lamps towards the sensor.
•The operation range depends on the brightness of the room.
•Objects between the remote control and sensor window block the transmission.
•Do not use the remote control simultaneously with remote controls of other devices.
Connection of the speakers
Uncoil the speaker wires and connect them to the speaker terminals SPEAKER (L / R) (16).
16.
