Using Contour Setup Manager
Introduction
Contour features a Setup Manager. The Setup Manager allows you to change various Contour settings and view Contour’s status. You can also use Setup Manager to carry out a software upgrade if a previous upgrade failed and you do not have access to the internet. You can access Contour Setup Manager after you have established a connection between your computer and Contour. Most people will only need to use Contour Setup Manager when they are initially setting up Contour using the temporary wireless connection (see “Stage 3: Accessing Contour Setup Manager” on page 8 for information on how to access Contour Setup Manager using a temporary wireless connection).
Note: If you are connected to Contour with a router, you will need to find out what IP address has been allocated to Contour by your router and enter this into the address field of your web browser. Consult your router documentation for more information on how to find out the IP address that has been allocated to Contour by your router.
Menu structure
The Contour Setup Manager menus are accessed by clicking tabs at the top of the window. The number of tabs available in Contour Setup Manager varies depending on whether Contour is being accessed using a wireless or wired connection. If accessing Contour Setup Manager using a wireless connection, three tabs are visible. If accessing Contour Setup Manager with a wired connection, four tabs are visible.
The available tabs are:
Connection The Connection tab is used to configure Contour’s wireless settings.
Advanced The Advanced tab opens the Manual Network Setup page.
Status The Status tab opens the Status Information page. This page displays information about the software and the wireless connection status.
Upgrade The Upgrade tab opens the Software Upgrade page. This page allows you to upgrade the software manually (only visible during wired setup).
15