Pure Digital 200i owner manual Software upgrade using a directly connected PC

Page 21

Software upgrade using a directly connected PC

If an automatic or manual software upgrade failed and you have lost network connectivity, you can upload the latest version of software to Contour by making a direct connection between your PC and the Ethernet port on Contour.

Note: Ensure that any wireless connections on your PC are disabled before carrying out the following steps.

1.Download the latest version of software for Contour from the Pure support site.

2.Disconnect the mains power adapter from the socket on the back of Contour.

3.Connect Contour to your computer using an Ethernet cable to the port on the back of Contour as shown below.

4.Ensure that the Contour has no devices in the dock and insert the connector of the mains power adapter into the socket on the rear of Contour.

5.Plug in to the mains supply.

6.Wait for the bright red LED to stop flashing.

7.Press the Standby key.

8.Wait for the white LED to stop flashing. This may take up to two minutes.

9.On your setup device, start your web browser (e.g. Safari, Google Chrome, Microsoft Internet Explorer, Mozilla Firefox).

10.Enter the following address: http://169.254.112.202

11.The Contour Setup Manager will display.

12.Carry out the Updating software using Contour Setup Manager procedure outlined on the following page to complete the software installation.

21

Image 21

Contents Page FCC Notice to a User in the United States Contents Getting started Remote controlIntroduction Contour 200i Air can be used in a number of different waysSoftware Upgrade Status Controls and connectorsDigital Coaxial Wi-Fi Setup Mute Volume down Volume up Aux EthernetFront panel Status LED Switching between Sleep, Standby and OnStage 1 Prepare Contour for wireless setup Preparing Contour to use AirPlay with Wi-FiPosition Contour in range of your wireless network Typical wireless setupStage 3 Accessing Contour Setup Manager Stage 2 Connecting your setup device to ContourConnecting using a temporary wireless network Contour Setup Manager will be displayedStage 4 Assigning Contour a unique name Stage 5 Adding Contour to your wireless networkPreparing Contour to use AirPlay with an Ethernet cable Typical Ethernet setup Insert the connector of the mainsAllowing commands to be sent back to iTunes from Contour Using AirPlay to play audioPlaying audio from iTunes Streaming audio to multiple roomsPlaying audio from an iPod touch, iPhone or iPad Compatibility Docking your device Listening to a docked iPod/ iPhone/iPadSelecting the dock Controlling your deviceUsing the digital output Using the auxiliary inputMenu structure Using Contour Setup ManagerManual wireless setup Automatic wireless setupConnection Contour name assignmentAdvanced Proxy Server Settings IP Address Status SignalUpgrade Upgrading software manually Manual software updatesSoftware upgrade using a directly connected PC Click Upload Updating software using Contour Setup ManagerPage Hints and tips HelpDisposal of Waste Electrical & Electronic Equipment SpecificationsPure Warranty Statement for Australia What’s covered by this warranty?What do you need to do now? Page Pure Vertrieb über 102YLHome Park Estate Chestnut Street, Suite San Francisco CA