Pure Digital 200i owner manual Preparing Contour to use AirPlay with Wi-Fi, Typical wireless setup

Preparing Contour to use AirPlay with Wi-Fi

Introduction

There are five stages in preparing Contour to use AirPlay if you are connecting Contour to your network with a wireless connection. Skip this section if you are using the wired connection method (see page 10).

1.Prepare Contour for wireless setup.

2.Create a connection between Contour and your setup device (any device with Wi-Fi and a browser, such as an iPhone or laptop), by using a temporary wireless network.

3.Access Contour Setup Manager.

4.Assign Contour a unique name.

5.Add Contour to your wireless network.

Stage 1: Prepare Contour for wireless setup

1.Position Contour in range of your wireless network.

2.Insert the connector of the mains power adapter into the socket on the rear of Contour.

Typical wireless setup

18V DC

3. Plug in to the mains supply.

4. When the red Status LED on the front has stopped flashing, Contour is in Sleep mode.

7