Pure Digital 200i owner manual Connection, Contour name assignment, Automatic wireless setup

Page 16

Connection

The Connection tab is divided into two main sections, Contour Name Assignment and Wireless Setup.

Contour Name

Assignment

Wireless Setup

Contour name assignment

See page 9 for more information on how to assign a unique name for Contour.

Automatic wireless setup

See page 9 for information on automatic wireless setup.

Manual wireless setup

If your wireless network is not broadcasting an SSID, you will need to configure your wireless settings manually.

1.Select ‘Configure Manually’ from the Network drop-down list and select the encryption type of your wireless network from the drop-down list below. Contour supports the following encryption types:

•No Encryption Select this option if your wireless network is unsecured.

•

WEP

Select this option if your wireless network is being secured using the

 

 

Wired Equivalent Privacy (WEP) method.

•

WPA

Select this option if your wireless network is being secured using the

 

 

Wi-Fi Protected Access (WPA) method.

•

WPA2

Select this option if your wireless network is being secured using the

 

 

Wi-Fi Protected Access II (WPA2) method.

Note: Please check your wireless router configuration to find out the type of encryption that is being used on your wireless network.

2.Enter the passphrase/key needed to connect to your network in the box below, if one is required.

3.Click Connect. The Status LED will then flash red to indicate that Contour is resetting. When Contour has started up it will enter Sleep mode.

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Page FCC Notice to a User in the United States Contents Remote control Getting startedIntroduction Contour 200i Air can be used in a number of different waysControls and connectors Software Upgrade StatusDigital Coaxial Wi-Fi Setup Mute Volume down Volume up Aux EthernetSwitching between Sleep, Standby and On Front panel Status LEDPreparing Contour to use AirPlay with Wi-Fi Stage 1 Prepare Contour for wireless setupPosition Contour in range of your wireless network Typical wireless setupStage 2 Connecting your setup device to Contour Stage 3 Accessing Contour Setup ManagerConnecting using a temporary wireless network Contour Setup Manager will be displayedStage 5 Adding Contour to your wireless network Stage 4 Assigning Contour a unique nameTypical Ethernet setup Insert the connector of the mains Preparing Contour to use AirPlay with an Ethernet cableUsing AirPlay to play audio Allowing commands to be sent back to iTunes from ContourPlaying audio from iTunes Streaming audio to multiple roomsPlaying audio from an iPod touch, iPhone or iPad Listening to a docked iPod/ iPhone/iPad Compatibility Docking your deviceSelecting the dock Controlling your deviceUsing the auxiliary input Using the digital outputUsing Contour Setup Manager Menu structureAutomatic wireless setup Manual wireless setupConnection Contour name assignmentProxy Server Settings IP Address AdvancedSignal StatusUpgrade Manual software updates Upgrading software manuallySoftware upgrade using a directly connected PC Updating software using Contour Setup Manager Click UploadPage Help Hints and tipsSpecifications Disposal of Waste Electrical & Electronic EquipmentWhat’s covered by this warranty? Pure Warranty Statement for AustraliaWhat do you need to do now? Page 102YL Pure Vertrieb überHome Park Estate Chestnut Street, Suite San Francisco CA
Top Page Image Contents