JVC XL-R5020BK Recording track marks manually, Sync ALL initial setting appears on the display

Page 36
7 Recording only one track from an external component
Digital recording from an MD recorder, a CD player, or a DAT deck connected to the DIGITAL IN terminals is initially set to record entire disc. You can also use Synchronized Recording for recording only one track. To use Synchronized Recording for one track, follow the procedure below.
Available source
OPTICAL IN, COAXIAL IN
34
To cancel the unfinalization,
press CANCEL in step 3.
Press SET to unfinalize the disc.
Unfinalization starts. The REC indicator lights up and the 3 indicator and “UNFINALIZE” start flashing on the display.
• Unfinalization requires a few minutes to complete. (When the disc is unfinalized, the REC indicator goes off and the 3 indicator and “UNFINALIZE” stop flashing then go off.)
4
The CD-RW and FINALIZED indicators light up on the display.
2 While 3-CD Changer and CD Recorder are in stop mode, press MENU.
3 Turn MULTI JOG ¢ / 4 on the unit or press 3 or 2 on the remote control until “UNFINALIZE” appears on the display then press SET. “UNFINALIZE?” appears on the display.
• If an unfinalized disc is loaded, “ALREADY UNFIN” appears on the display.
Load a finalized disc you want to unfinalize on the CD Recorder disc tray.
1
XL – R5020 CD/CDR MULTIPLE COMPACT DISC RECORDER
Recordable
ReWritable
CANCEL
MENU SET
7 Unfinalizing a disc—only for CD-RW
By erasing the TOC (Table of Contents) of a finalized CD-RW, you will be able to record on the CD-RW again.
This erasing process of the TOC is called “Unfinalization.”
• Unfinalization is just to erase the TOC, but not the recorded music signals on the disc.
IMPORTANT
When you unplug the power cord or when a power failure occurs while “UNFINALIZE” is flashing on the display, the disc may not be utilized any more.
MULTI JOG ¢ / 4
CD Recorder disc tray
On the unit:

Remote control:

3 / 2

1 2 3

4

5

 

6

 

7

8

 

9

 

10

10

 

GROUP

PLAY

 

CONTROL

 

MODE

REPEAT

CD

CDR

Y

 

 

M

 

A

 

 

 

L

 

 

E

P

 

 

 

N

IS

GROUP

 

 

U

D

 

 

 

 

 

 

 

SET

 

E

 

 

 

GROUP

 

R

 

 

 

 

 

C

 

 

 

 

L

S

 

 

 

E

 

 

 

 

C

 

O

 

 

A

 

 

UR

CE

 

N

 

 

 

C

MENU

SET

CANCEL

CD REC CD EDIT SYNCHRO FADE

REC FINALIZE PITCH 0

1 While 3-CD Changer and CD Recorder are in stop mode, press MENU.

2 Turn MULTI JOG ¢ / 4 on the unit or press 3 or 2 on the remote control until “DIG-IN SYNC” appears on the display, then press SET.

“SYNC ALL” (initial setting) appears on the display.

•To cancel the setting, press CANCEL.

3 Turn MULTI JOG ¢ / 4 on the unit or press 3

or 2 on the remote control to select “SYNC 1-

TRACK” then press SET.

To use Synchronized Recording for recording all tracks,

select “SYNC ALL” in step 3.

Digital signal cannot be output through the DIGITAL OUT terminals while recording digitally from an external component.

7Recording track marks manually

When auto track-marking is activated (initial setting), track marks are recorded automatically. To cancel auto track- marking and use manual track marking, follow the procedure below.

1 While 3-CD Changer and CD Recorder are in stop mode, press MENU.

2 Turn MULTI JOG ¢ / 4 on the unit or press 3 or 2 on the remote control until “AUTO TRACK” appears on the display then press SET.

“AUTO TR ON” (initial setting) appears on the display.

•To cancel the setting, press CANCEL.

3 Turn MULTI JOG ¢ / 4 on the unit or press 3 or 2 on the remote control to select “AUTO TR

OFF,” then press SET.

The AUTO TRACK indicator goes off from the display, and auto track-marking is canceled. Now you can put track marks manually during recording.

To put track marks during recording manually, press SET at the point where you want to put a track mark. You can add up to 99 track marks.

Page 35 Page 37
Image 36
Page 35 Page 37
Contents XL-R5020BK For U.S.A Important for Laser ProductsTable of Contents Precautions IntroductionPrecautions on Disc Playback and Recording PlaybackRecording Important noticeParts Identification See pages in the parentheses for detailsSTANDBY/ON To cancel the reset, press Cancel To operate 3-CD Changer, press Control CDTo operate CD Recorder, press Control CDR Supplied Accessories Putting the Batteries into the Remote ControlGetting Started Connecting Other Components To connect an analog componentTo connect digital components Audio component with digital outputAudio component with digital input Turning On and Off the Power Listening with HeadphonesTo increase the volume level, turn Phone Level control to Basic OperationsPlaying Back Discs on 3-CD Changer Loading DiscsPlaying Back All Loaded Discs-Continuous Play On the unit onlyBasic Disc Operations To start playing a disc during playback of another discTo go to another track To go to another track directlyPrograming the Playing Order of the Tracks-Program Play To check the programed contents To modify the programPlay 3 Stop Play Mode Random indicator also lights up on the displayPlaying at Random-Random Play CD Changer Multi JOG ¢ Disc traysAdjusting the Playback Speed-Pitch Control Repeating Tracks-Repeat PlayProhibiting Disc Ejection-Tray Lock Press Pitch + or − during playPlaying Back a Disc on CD Recorder Loading a Disc Playing Back a Disc-Normal PlayPress Eject Press Eject 0 againLoad a disc onto the CD Recorder disc tray see CDRPress Control CDR, then Playing Back MP3 Discs on 3-CD Changer About MP3MP3 Disc Structure Playing Back MP3 Discs Pause Play StopButtons Track numbers already played go off from the displayBasic MP3 Disc Operations To go to another track within a group directlyTo go to another group To go to another group directlyRecording on a CD-R/CD-RW Before You Start RecordingRecording Manually-Standard Recording Press ¶ REC/REC MutingStart recording Press one of the disc number buttons CD1, CD2, CD3 you wantTo adjust the analog recording level Press SET or Menu to finish the adjustmentREC Level +/− Menu SETTo make a silent portion while recording To fade in and out recording-only for analog sourceTo change the display information while recording Preparing for CD Synchronized Recording Changing the recording speedFinalizing discs automatically CD REC ¶ Cancel Recording from 3-CD Changer-CD Synchronized RecordingDisc Direct Recording Normal initial setting appears on the display Recording the entire disc without any interruptionMulti JOG ¢ To release the seamless recording, select NormalOne Track Recording CD REC ¶Stop 7 for CD RECTo skip the currently playing track, press Cancel To erase all programed tracks, press Cancel in stepListening Edit Recording To program other tracks, repeat stepProgram Edit Recording Start playback of the selected external component Press SynchroRecording from the Two Sources Mixed-Sound Mixing Recording MIX Balance SelectorPause REC Muting ¶ REC/REC Muting Other Recording Functions Finalizing a disc-CD-R/CD-RWPress Finalize again to finalize a disc Sync ALL initial setting appears on the display Auto TR on initial setting appears on the displayRecording track marks manually To use Synchronized Recording for recording all tracksSeparating recording tracks automatically Turning on or off sampling frequency rate converterRecording skip marks onto a CD-R/CD-RW-Track Skip Erasing tracks only for CD-RW-Track Erase Erasing all tracks only for CD-RW-Disc EraseLoad an unfinalized disc on the CD Recorder disc tray Load a recorded disc on the CD Recorder disc trayUsing the Timer Setting the ClockTo adjust the clock again To set the clock first timeUsing Daily Timer and Once Timer How Timers actually workSTANDBY/ON Menu SET Cancel Unit enters off-time setting modeSetting Playing Timer Setting Recording TimerTimer Priority To turn on Playing Timer or Recording TimerCompu Link Remote Control System ConnectionAvailable functions Automatic source selectionMaintenance Glossary Signification Solution MessageTroubleshooting Symptom Possible Cause ActionSpecifications Authorized Service Centers Limited Warranty 0502KTYMDWJEM
Top Page Image Contents