JVC XL-R5020BK manual Introduction, Precautions

Page 4

Introduction

We would like to thank you for purchasing one of our JVC products.

Before operating this unit, read this manual carefully and thoroughly to obtain the best

possible performance from your unit, and retain this manual for future reference.

About This Manual

This manual is organized as follows:

•You can use the buttons and controls both on the remote control and on the unit for the same operations if they have the same or similar names (or marks), unless mentioned otherwise.

•Basic and common information that is the same for many functions is grouped in one place, and is not repeated in each procedure. For instance, we do not repeat the information about turning on/off the unit and others, which are explained in the section “Basic Operations” on page 9.

•The following marks are used in this manual:

Gives you warning and caution to prevent from damage or risk of fire/electric shock. Furthermore, gives you information which is not good for obtaining the best possible performance from the unit.

Gives you information and hints you had better know.

Precautions

Installation

•Install the unit in a place which is level, dry and neither too hot nor too cold—between 5˚C (41˚F) and 35˚C (95˚F).

•Install the unit in a location with adequate ventilation to prevent internal heat build-up in the unit.

DO NOT install the unit in a location near heat sources, or in a place subject to direct sunlight, excessive dust or vibration.

Power sources

•When unplugging the unit from the wall outlet, always pull the plug, not the AC power cord.

DO NOT handle the AC power cord with wet hands.

Moisture condensation

Moisture may condense on the lens inside the unit in the following cases:

•After starting heating in the room

•In a damp room

•If the unit is brought directly from a cold to a warm place Should this occur, the unit may malfunction. In this case, leave the unit turned on for a few hours until the moisture evaporates, unplug the AC power cord, then plug it in again.

Others

•Should any metallic object or liquid fall into the unit, unplug the AC power cord and consult your dealer before operating any further.

•If you are not going to operate the unit for an extended period of time, unplug the AC power cord from the wall outlet.

DO NOT disassemble the unit since there are no user serviceable parts inside.

If anything goes wrong, unplug the AC power cord and consult your dealer.

2

Page 3 Page 5
Image 4
Page 3 Page 5
Contents XL-R5020BK For U.S.A Important for Laser ProductsTable of Contents Precautions IntroductionPrecautions on Disc Playback and Recording PlaybackRecording Important noticeSee pages in the parentheses for details Parts IdentificationSTANDBY/ON To operate 3-CD Changer, press Control CD To cancel the reset, press CancelTo operate CD Recorder, press Control CDR Putting the Batteries into the Remote Control Supplied AccessoriesGetting Started Connecting Other Components To connect an analog componentAudio component with digital output To connect digital componentsAudio component with digital input Turning On and Off the Power Listening with HeadphonesTo increase the volume level, turn Phone Level control to Basic OperationsPlaying Back Discs on 3-CD Changer Loading DiscsPlaying Back All Loaded Discs-Continuous Play On the unit onlyBasic Disc Operations To start playing a disc during playback of another discTo go to another track To go to another track directlyPrograming the Playing Order of the Tracks-Program Play To check the programed contents To modify the programPlay 3 Stop Play Mode Random indicator also lights up on the displayPlaying at Random-Random Play CD Changer Multi JOG ¢ Disc traysAdjusting the Playback Speed-Pitch Control Repeating Tracks-Repeat PlayProhibiting Disc Ejection-Tray Lock Press Pitch + or − during playPlaying Back a Disc on CD Recorder Loading a Disc Playing Back a Disc-Normal PlayPress Eject Press Eject 0 againCDR Load a disc onto the CD Recorder disc tray seePress Control CDR, then About MP3 Playing Back MP3 Discs on 3-CD ChangerMP3 Disc Structure Playing Back MP3 Discs Pause Play StopButtons Track numbers already played go off from the displayBasic MP3 Disc Operations To go to another track within a group directlyTo go to another group To go to another group directlyRecording on a CD-R/CD-RW Before You Start RecordingRecording Manually-Standard Recording Press ¶ REC/REC MutingStart recording Press one of the disc number buttons CD1, CD2, CD3 you wantTo adjust the analog recording level Press SET or Menu to finish the adjustmentREC Level +/− Menu SETTo fade in and out recording-only for analog source To make a silent portion while recordingTo change the display information while recording Changing the recording speed Preparing for CD Synchronized RecordingFinalizing discs automatically Recording from 3-CD Changer-CD Synchronized Recording CD REC ¶ CancelDisc Direct Recording Normal initial setting appears on the display Recording the entire disc without any interruptionMulti JOG ¢ To release the seamless recording, select NormalOne Track Recording CD REC ¶Stop 7 for CD RECTo skip the currently playing track, press Cancel To erase all programed tracks, press Cancel in stepListening Edit Recording To program other tracks, repeat stepProgram Edit Recording Start playback of the selected external component Press SynchroMIX Balance Selector Recording from the Two Sources Mixed-Sound Mixing RecordingPause REC Muting ¶ REC/REC Muting Finalizing a disc-CD-R/CD-RW Other Recording FunctionsPress Finalize again to finalize a disc Sync ALL initial setting appears on the display Auto TR on initial setting appears on the displayRecording track marks manually To use Synchronized Recording for recording all tracksTurning on or off sampling frequency rate converter Separating recording tracks automaticallyRecording skip marks onto a CD-R/CD-RW-Track Skip Erasing tracks only for CD-RW-Track Erase Erasing all tracks only for CD-RW-Disc EraseLoad an unfinalized disc on the CD Recorder disc tray Load a recorded disc on the CD Recorder disc trayUsing the Timer Setting the ClockTo adjust the clock again To set the clock first timeUsing Daily Timer and Once Timer How Timers actually workSTANDBY/ON Menu SET Cancel Unit enters off-time setting modeSetting Playing Timer Setting Recording TimerTimer Priority To turn on Playing Timer or Recording TimerCompu Link Remote Control System ConnectionAvailable functions Automatic source selectionMaintenance Glossary Signification Solution MessageTroubleshooting Symptom Possible Cause ActionSpecifications Authorized Service Centers Limited Warranty 0502KTYMDWJEM
Top Page Image Contents