Samsung DVD-V9500 instruction manual Display Options, TV Aspect, Black Level, Alt Video Out

DVD O P E R AT I O N S

Display Options

TV Aspect

Depending on the type of television you have, you may want to adjust the screen setting (aspect ratio).

-4:3 Letter Box: Select when you want to see the total 16:9 ratio screen DVD supplies, even though you have a TV with a 4:3 ratio screen. Black bars will appear at the top and bottom of the screen.

-4:3 Pan&Scan: Select this for conventional size TVs when you want to see the central portion of the 16:9 screen. (Extreme left and right side of movie picture will be cut off.)

-16:9 Wide: You can view the full 16:9 picture on your wide screen TV.

Black Level

The Black Level feature adjusts black reference level in the video signal to one of two choices:

- On: This will enhance the Black Level for increased brightness/contrast when viewing DVDs.

-Off: This is the Standard NTSC reference Black

Level for consistent brightness/contrast across all sources.

Alt Video Out

The “Alt Video Out” option must be set in the on-screen menu if you have connected your DVD-VCR to a TV using the S-VIDEO OUT or

COMPONENT VIDEO OUT jacks.

-COMPOSITE/S-VIDEO: Select when you want to use S-Video or Composite output.

-COMPONENT(I-SCAN): Select when you want to use Component interlace(525i) Out.

-HDMI/COMPONENT(P-SCAN) : Select when you want to use Progressive(525p) Out.

Note

It cannot be adjusted when Alt Video Out is set to Progressive.

▼ -	See your TV owner’s manual to
	determine what type of TV you have.
-	COMPONENT(I-SCAN): Interlaced
	Scan mode will work.
- HDMI/COMPONENT(P-SCAN):
	Progressive Scan mode will work,
	and Video and S-Video will not work.
-	Press the P.SCAN button on the front
	panel in stop mode.
	Be sure to set the correct Video
	output for the proper picture.

ENG-60