Samsung DVD-V9500 instruction manual Identifying VCR Problems

Page 85

R E F E R E N C E

Problem

 

 

Action

Page

 

 

 

 

 

The screen is

Press the HD/CH (

) buttons simultaneously for more than 5

 

blocked

 

seconds with no disc in the unit. All settings will revert to the factory

-

 

settings.

 

 

 

 

 

 

Forgot password

Press the HD/CH (

) buttons simultaneously for more than 5

 

 

seconds with no disc in the unit. All settings including the

P62~64

 

 

 

 

password will revert to the factory settings. Don't use this unless

 

 

 

absolutely necessary.

 

If you experience

Go to the contents and find the section of the instruction book that

 

 

contains the explanations regarding the current problem, and

 

other problems.

 

 

 

follow the procedure once again.

 

 

 

 

 

If the problem still cannot be solved, please contact your nearest

 

 

 

authorized service center.

 

The picture is

Make sure that the disc is not dirty or scratched.

 

noisy or distorted

Clean the disc.

 

 

Identifying VCR Problems

Problem

 

Action

Page

 

 

 

 

No power

Check that the power plug is connected to a wall outlet.

-

You cannot insert

• A video cassette can only be inserted with the window

P65

a video cassette

 

side up and the safety tab facing you.

 

 

The television

• Check the DVD-VCR antenna/cable connections.

 

program was not

• Is the DVD-VCR tuner properly set?

-

recorded

• Check if the safety tab is intact on the cassette.

 

Timer recording

Re-check the recording start/stop time settings.

 

If there was a power failure or interruption during timer

 

was unsuccessful

P81~82

 

recording, the recording will have been cancelled.

 

 

 

No playback picture

• Check to see if you are using a prerecorded tape.

 

or the picture is

 

 

P77

distorted

 

 

 

 

 

You cannot see

• Check the tuner or external setting. It should be on tuner.

-

normal broadcasts

• Check the TV or VCR antenna connections.

 

Noise bars or

• Press the TRK buttons to minimize this effect.

P68

streaks on playback

 

 

 

 

 

When the II button

A still picture may have “noise bars”, depending on the

 

is pressed during

 

 

condition of the tape. Press the TRK buttons during slow

-

playback, the still

 

 

motion to minimize this effect.

picture has severe

 

 

 

 

 

“noise bar” streaks

 

 

 

Video Head

If poor pictures appear on a variety of cassettes, the video

 

Cleaning

 

heads may need cleaning. This is not a common problem

 

 

 

and unless it appears, the heads should not be cleaned.

-

 

 

When cleaning the video heads, read all instructions

 

 

 

provided with the head cleaning cassette. Incorrect head

 

 

 

cleaning can permanently damage the video heads.

 

 

 

 

 

 

 

ENG-85

 

Image 85
Contents DVD-V9500 Important Safety Instructions Safety InstructionsInstall Batteries in the Remote Control AccessoriesIf the remote control doesn’t operate properly Before you startTable of Contents VCR Operations DVD OperationsReference DVD-VCR Features General FeaturesDVD Features VCR FeaturesCharacteristics Disc Type and CharacteristicsDisc Markings Region NumberFront Panel Controls DescriptionFront Panel Display Connect to the Audio input jacks of your television Rear PanelConnect your DVD-VCR to a TV Tour of the Remote Control Method1 Antenna + DVD-VCR + TV No Cable box Connecting the Antenna CableENG-11 ENG-12 Using video/audio cables, connect the Video Before Connecting the DVD-VCRConnection to a TV Connection to a TV VideoENG-14 Connection to a TV S-VideoENG-15 Connection to a TV InterlaceENG-16 Connection to a TV ProgressiveHdmi Video Specifications Connecting to a TV with Hdmi JackHdmi High Definition Multimedia Interface Why does Samsung use HDMI?Hdmi connection description Connection to an Audio System Using the video signal cables, connectConnection to an Audio System 2 Channel Amplifier VIDEO, S-VIDEO or Component OUTENG-20 Connecting the Power Cord & Auto Setup Selecting a Menu Language Setting the Clock Automatically Setting the ClockAuto, 1, 2 ENG-23Select Automatic to set the time zone automatically Select the time zone of your areaENG-24 Press the Enter button to set the clock Setting the Clock ManuallyENG-25 Memorizing the Channels Selecting the Video Signal-sourceENG-26 Adding and Erasing Channels Manual Method Storing Channels in Memory Automatic MethodRepeat steps 7 to add or To delete additional channels ENG-27Press the Menu button to exit ENG-28 Selecting the RF Output ChannelENG-29 Setting the Front Panel DisplaySetting the Power Off Automatically Before Play Playing a DiscPlayback Stopping PlaySlow Motion Play Except CD Pausing PlayTo remove the Disc Remote control for more than 1 second Using the Search and Skip FunctionsSearching through a Chapter or Track Skipping TracksWhen Playing a DVD/CD Using the Display FunctionTracks on an audio CD ENG-35ENG-36 Using the Disc and Title Menu DVDENG-37 Using the Function Menu DVDPress the œ/√ buttons to Repeat PlayThen press the Enter Button To stop repeat play, you can also press the Clear buttonPress the œ/√ buttons to select a Using the A-B Repeat functionMark the Ending Point LoopSlow Repeat Play When playing a DVDTo Playback using Aspect Ratio DVD Adjusting the Aspect Ratio EZ ViewIf you are using a 169 TV For 169 aspect ratio discsFor 169 aspect ratio discs Letter Box If you are using a 43 TVPan Scan ENG-42Selecting the Audio Language Using the Audio button DVD/CDDuring play, press the Audio button ENG-43Selecting the Subtitle Language Using the Subtitle button DVDDuring play, press ENG-44Using the Angle button DVD Using the Bookmark FunctionUsing the Mark button DVD Changing the Camera AngleClearing a Bookmark Recalling a Marked ScenePress the Play/Pause button to skip to the marked scene ENG-46Press the √ or Enter button Using the Zoom Function DVDENG-47 Folder Selection Clips Menu for MP3/WMA/JPEGTo select the Parent Folder To select the Peer FolderRepeat/Random playback MP3/WMA PlaybackOff, Track, Folder Random Your MP3 or WMA files should be ISO 9660 or Joliet format MP3/WMA fileDo not try recording copyright protected MP3 files Program Play & Random Play Play mode menu will appearProgram Play Program play screen will appearAlbum Screen Picture CD PlaybackRotation ZoomJpeg Discs ENG-54 Using the Setup MenuENG-55 Setting Up the Language FeaturesDisc Menu Language FunctionAudio SubtitleENG-57 Setting Up the Audio OptionsDolby/DTS Digital Out Audio OptionsDynamic Compression PCM Down SamplingENG-59 Setting Up the Display OptionsTV Aspect Display OptionsBlack Level Alt Video OutENG-61 HdmiPlayer is locked Setting Up the Parental ControlENG-62 To make the DVD setup menu Setting Up the Rating LevelNot play ENG-63ENG-64 Changing the PasswordTo Insert a Video Cassette Tape Inserting and Ejecting a Video Cassette TapeTo Eject a Video Cassette Tape Press the Stop button to stop playing the tapePlaying the Tape Playing a Pre-Recorded Video Cassette TapeFrame Advance Special VCR Playback FeaturesFps/Rps Review SkipShuttle Using Automatic TrackingInsert and play a video cassette tape ENG-68ENG-69 Selecting the Cassette TypeSetting the Auto Play Setting the Auto Repeat When you are ready Using the Tape CounterENG-73 Using the Assemble Edit FunctionAudio output mode Selecting the Audio Output ModeCH or buttons for television channel Next Etc Seq Searching for a Specific SequenceENG-75 Go To 00000 Stop Variable Search SystemEnd Search Forward Intro ScanBasic Recording Power on the DVD-VCR Power on the TVProtecting a Recorded Cassette RecordingTo Watch a different Channel while Recording Special Recording FeaturesPause/Resume Recording Press the Play/Pause button Stop RecordingTo Watch a DVD while Recording Using One-Touch RecordingTo Add Recording Time See One-Touch Recording OTR belowAdd Recording Time Selecting the Recording SpeedMaximum Recording Time SP vs. SLP Tape LengthTo Begin Setting the Timer Recording Using a Timer RecordingSelect Channel Number Set Time/Date/SpeedDaily/Weekly Date Programming Selecting Auto SpeedButton Function Using the TV Buttons on the Remote ControlIdentifying DVD Problems TroubleshootingAction Icon appears on screenIdentifying VCR Problems ProblemInputs Technical SpecificationsENG-87 One 1 Year Parts / Ninety 90 days Labor WarrantyAK68-00742A-00