Samsung DVD-VR335 instruction manual Content Protection for Recordable Media Cprm

Page 64

Concerning Copy Control Signals

TV broadcasts that contain copy control signals may have one of the following three signal types, Copy-Free, Copy- Once and Copy-Never. If you want to record a copy-once type program, use DVD-RW with CPRM in VR Mode or DVD-RAM discs.

 

Copy-Free

Copy-Once

 

Copy-Never

DVD-RW(Ver.1.1)

O

 

-

-

DVD-RW(Ver.1.1)

 

 

 

 

with CPRM

 

 

 

 

VR mode

O

O

*

-

DVD-R

O

 

-

-

DVD-RAM(Ver.2.0)

O

O

*

-

DVD+R

O

 

-

-

DVD+RW

O

 

-

-

Once “Copy Once” has been recorded, additional recording cannot be performed.

* compatible with CPRM.

- Content Protection for Recordable Media (CPRM)

CPRM is a mechanism that ties a recording to the media on which it is recorded. It is supported by some DVD recorders, but not by many DVD players. Each blank recordable DVD has a unique 64-bit media ID etched in the BCA(Burst Cutting Area). When protected content is recorded onto the disc, it can be encrypted with a 56-bit C2 (Cryptomeria) cipher derived from the media ID. During playback, the ID is read from the BCA and used to generate a key to decrypt the contents of

the disc. If the contents of the disc are copied to other media, the ID will be absent or wrong and the data will not be decryptable.

3Press the CH/TRK ( / ) buttons or number buttons to select the channel you want to record.

4Press the REC SPEED button repeatedly, to select the recording speed (quality).

• XP(High, approx. 1 hour)

SP(Standard,

approx. 2 hours)

LP(Low, approx. 4 hours)

EP(Extended Play, approx. 6 hours/8hours)

-RW VR

XP

CH6

Recordable Time 00:26

 

 

5 Press the REC button.

“ ” is displayed on the screen and recording begins.

6Press the STOP button to stop or finish a recording in progress.

The message “Updating the information of disc. Please wait for a moment” is displayed.

Pausing / Resuming

Recording

Recording the Current Channel you are watching

Press the REC PAUSE button to pause a recording in progress.

Press the REC PAUSE button again during pause to resume recording.

• You

can

switch channels by pressing the

CH/TRK

(

/

) buttons while recording pauses.

 

1.Check to make sure the antenna cable is connected.

2.Check the remaining time on the disc.

DVD-RAM/DVD±RW/+R discs should be formatted or initialized in advance before beginning recording. (See page 63.)

1

Press the

OPEN/CLOSE

button and place a

recordable disc on the disc tray.

 

 

 

Press the

OPEN/CLOSE button to close the disc

2 tray.

 

 

Wait until “LOAD” disappears from the front panel display.

Note

Recording will stop automatically if there is no free space left for recording.

Up to 99 titles can be recorded onto a DVD- RAM/-RW/-R disc, and up to 48 titles onto a DVD+RW/+R disc.

If the power is interrupted due to power fail- ure or other reasons, the title being recorded will not be saved onto the disc.

Recording will stop automatically if a copy protected image is selected.

Do not use DVD-R authoring discs with this unit.

64 - English

Image 64
Contents DVD-VR335 FCC Note for U.S.A Precaution Important Safety InstructionsMaintenance of Cabinet Handling CautionsDisc Specifications Disc StorageThis is not a malfunction of the unit An audio disc on which 44.1kHz PCM Audio is recordedThis product ProtectionNot all brands of discs will be compatible with this unit Contents Using the Bookmarks Using the Markers Special Recording FeaturesPlaying back an MP3 Disc To Program Tracks Playing a Picture DiscGeneral Features Before Reading User’s Manual Recorder & VCRStep Description Front PanelAccessories Using an Hdmi cableCheck for the supplied accessories below Fan always revolves when the power is onPower Button Number Button 100+ Button TV Power Button 22. TV/VCR Button Marker ButtonCancel Button Timer REC ButtonConnecting & Setting Up Quick OverviewConnecting the Antenna Cable Antenna + DVD Recorder & VCR + TV No Cable boxIf you have two separate antennas one VHF Other UHF, use a UHF/VHF combinerConnections Connections Connecting the Video Cable Connecting to a Video input jackYou will enjoy regular quality images See pages 21 ~Connecting to an S-Video input jack See pages 21 ~ Video and Component video output areConnecting to Component video input jacks Y,PB,PR Connecting the Audio Cable Connecting to your TVSelect one of the Audio connections on the following pages This connection will use your TV’s speakersConnecting to a stereo amplifier with analog input jacks Connecting to an AV amplifier with a digital input jack AV amplifierConnecting to a TV with Hdmi Jack To audio on your TV when using HDMI, set the digiConnecting to a TV with DVI Jack To change Hdmi output resolution, seeHdmi connection description Why does Samsung use HDMI? What is the HDCP?Connecting External Devices You can record from connected equipment VCR, STB or DVDYou can also use the AV 2 in jacks on Must choose AV 1 Composite or S-video. SeeConnecting a Camcorder to the AV 2 in jacks If the AV 2 In input source is not selectedIf the input is not selected automatically, use Connecting a Camcorder to the DV in jackInput SEL. button to select proper input Install Batteries in the Remote Control If the remote control does not operate properlyOpen the battery cover on the back of the remote control Replace the battery coverSetting the Remote Control Brand CodesOn-Screen Menu Navigation …/†,œ /√ ButtonsEnter Button Return ButtonClock Data CH Auto Clock SetTime Zone Manual Clock Set Daylight SavingYes or No, then …† buttons to selectChannel Set Auto Channel MemoryPress …† buttons to select Press …† buttons to select Channel SetChannel Add/Delete RF Output ChannelChannel Channel screen. Then, pressSetting Up Language Options …† buttons to select RF OutputLanguage , then Press …† buttons to select the desiredDigital Output Setting Up the Audio OptionsDynamic Compression TV Aspect Input LevelBlack Level 3D Noise ReductionSetting Up the Parental Control HDMI/DVI Resolution…† buttons to select Setup, then press Enter or √ button DivXR RegistrationAbout the Change Password ‘Confirm the password’ message will be displayedPress the …† buttons to select Rating LevelVCR Setting Tape LengthAuto Play Auto RepeatVideo Input …† buttons to select Video Input , then…† buttons to select AV 1 or Press the …† buttons to selectAutomatic Chapter Creator System , then…† buttons to select On, then press Enter or √ button Menu button to exit the menuQuick Recording System, then press Enter or √ buttonQuick Recording On, then press Enter or √ buttonBefore Playing Region code DVD-Video onlyDisc types that can be played Read the following information before playing a discPlaying a Disc Discs that cannot be playedUsing the Search & Skip Functions For DVD-VIDEO discFor DVD-RAM/DVD±RW/DVD±R disc Skipping Chapters or TracksMoving to a scene directly using the Anykey About AnykeySlow Motion Play Step Motion Play Slow Motion Play DVD-VIDEO / DVD-RAM / DVD±RW / DVD±RRepeat Playback Playing RepeatedlyRepeat PlaybackTo return to normal playback …† buttons to select RepeatSelecting the Subtitle language Using the Anykey buttonSelecting the Audio language Changing the Camera Using the Angle buttonAngle Playing back a Bookmark Clearing a BookmarkPlaying back a Marker Using the MarkersClearing a Marker Buttons on the Remote Control used for CD playback Playing an Audio CD CD-DAPlaying back an MP3 Disc When Intro Play is completed, Normal Play is per- formed Audio/MP3 DiscDuring playback, press Play option will be highlightedTo Program Tracks Anykey buttonPlaylist, then To select Disc NavigationReturns to the Album screen Unit enters slide show mode √llSlide show Rotation or Insert a MPEG4 Disc into the disc trayPlaying the VCR TrackingVHS Playback Frame AdvanceFps/Review SkipForward Intro Scan or Reverse Intro Scan, then pressBefore Recording Recordable discsRecording Mode DVD-RAM/-RWVR modeRecording Formats Unrecordable videoContent Protection for Recordable Media Cprm Recording from External Devices DV Input jackTimer REC button Making a One TouchRecording OTR Enter orRecording mode DVD Recording mode VCRIf the timer settings overlap # To makeRecording section for more information on Timer Edit the items you want to modify. See the TimerEdit, then press Basic VCR Recording Maximum Recording Time SP vs. SLPScheduled Before startingPausing / Resuming When the DVD Recorder & VCR is connectedTo Watch a Different Channel from the One being Recorded Watch a different media during record- ingCopy to DVD or VCR To copy from DVD to VCRDirect copy DVD to VCR DVD -- VCRTo copy from VCR to DVD Direct copy VCR to DVDPress …† buttons VCR--DVD , thenUsing the Title List button Using the Menu buttonPlaying the Title List Play butFree Space Function Play, Rename, DeletePlay to play Anykey buttonRenamingLabeling a Title Press …† buttons to select a title you want toOr √ button Rename , thenProtection , then LockingProtecting a TitleStatus Deleting a Title Deleting a Section of a TitleEdit Title List Screen Elements Edit Title List screen is displayedSelect Delete Then Editing a Chapter …† buttons to select a title containing aChapter Edit Chapter Edit Screen ElementsFollow steps 1 to 3 Enter buttonPress Delete All,Dividing a Title Divide from the Title List, then pressDivide Title , then Divide Title List screen is displayedNew Playlist Creating a PlaylistReturn , then Playing Titles in the Playlist Renaming a Playlist TitlePlaylist , then Edit PlaylistEnter the desired characters using Editing a Scene for the PlaylistButtons Follow these instructions to edit scenes for a playlistTo setup, follow steps 1 to 3 To stop scene play, pressPress …† œ √ buttons to select the scene Modify, then…† buttons to select Move, then press Add, then pressSelect Delete, then Copying a Playlist Title to the VCR…† buttons to select the title you want Disc Manager Deleting a Playlist Title from the PlaylistEditing the Disc Name Yes, then pressDisc Manager Disc ProtectionDisc Protection Finalizing a disc Formatting a DiscButton Unfinalizing a disc V/VR mode Enter button Disc is finalizedTitles from the record list PlayerDelete All Title Lists Edit Compatible Press √ buttons to select Yes, then press Enter button AllLists are deleted Title Menu buttonReference Power turns on Timer recording doesNo response Forget the password Input is displayedTroubleshooting DVD Troubleshooting VCR Movie Please check the discMake sure there are no scratches or dirt on the disc Disc is PAL format and cannot be played on this unitProblem Explanation / Solution Specifications GeneralInput Audio OutputSamsung DVD Recorder & VCR Contact Samsung World Wide Samsung Electronics AMERICA, INC