Samsung DVD-VR335 Input is displayed, For a while when, Power turns on, Cannot record TV

Page 95

Troubleshooting (DVD-VIDEO/DVD-RAM/DVD±RW/DVD±R)

If your product malfunctions, go through the check points below before contacting a Samsung authorized ser- vice center,

Problem

 

 

Explanation/Solution

 

 

 

No power.

•

Check whether the power cord is securely plugged into the power outlet.

 

•

Did you press the power button of your DVD Recorder & VCR.

 

 

The input is displayed

• The DVD Recorder & VCR requires some time to initialize after it is turned on.

for a while when the

 

If Quick recording function is set to on, the DVD Recorder & VCR will power on quickly,

power turns on.

 

 

which enables you to immediately record a desired channel. (See page 44.)

 

 

 

 

 

Cannot record TV

•

Check whether the power cord is securely plugged into the power outlet.

programs.

•

Did you set the DVD Recorder & VCR channel settings correctly?

 

• Check the free space on your DVD-RAM/DVD±RW/DVD±R disc.

 

• Check the antenna cable is connected.

 

 

 

 

Timer recording does

•

Check the recording time, end time and current time settings again.

not work properly.

• Recording will be cancelled if the power is interrupted due to a power

 

 

failure or other reason during recording.

 

 

 

Cannot record.

• Check whether the disc is formatted. This product can record on

 

 

formatted discs only. (See page 86.)

 

 

• Check whether your DVD-RAM/DVD±RW/DVD±R disc has a sufficient free space.

 

 

I pressed the REC

• Recording is available on DVD-RAM/DVD±RW/DVD±R discs only.

button but there is

•

If a program is copy protected, you cannot record it.

no response.

 

 

 

 

 

 

 

 

 

I forget the password

•

Press and hold the

CH ( /

) button on the front panel of your unit for more than 5

for parental lock.

 

seconds with no disc, and then press the

POWER OFF/ON button. All settings including

 

 

password will revert to factory settings. Do not use it if not absolutely required.

 

 

(Note that this function is available only when there is no disc inserted.)

 

 

 

Cannot play the disc.

•

Check whether the disc is inserted correctly with the label facing up.

 

•

Check the regional code of your DVD disc.

 

 

• This DVD Recorder & VCR cannot playback some types of disc. (See page 5.)

 

 

 

 

 

No sound.

•

Are you watching a

program in slow or skip

mode?

 

If you are playing a program at a speed other than normal speed, sound

 

 

 

 

is not output. (Except for forward search Playback (Fast1))

 

• No sound will be heard when scanning an MPEG4 disc.

 

• Check the connections and initial settings.

 

 

• Check whether the disc is damaged.

 

 

 

Clean up the disc, if necessary.

 

 

•

Check whether the disc is inserted correctly with the label facing up.

 

 

 

 

 

Reference

English - 95

Page 94 Page 96
Image 95
Page 94 Page 96
Contents DVD-VR335 FCC Note for U.S.A Handling Cautions PrecautionImportant Safety Instructions Maintenance of CabinetAn audio disc on which 44.1kHz PCM Audio is recorded Disc SpecificationsDisc Storage This is not a malfunction of the unitNot all brands of discs will be compatible with this unit ProtectionThis product Contents To Program Tracks Playing a Picture Disc Using the Bookmarks Using the MarkersSpecial Recording Features Playing back an MP3 DiscGeneral Features Recorder & VCR Before Reading User’s ManualStep Front Panel DescriptionFan always revolves when the power is on AccessoriesUsing an Hdmi cable Check for the supplied accessories belowTimer REC Button Power Button Number Button 100+ ButtonTV Power Button 22. TV/VCR Button Marker Button Cancel ButtonQuick Overview Connecting & Setting UpOther UHF, use a UHF/VHF combiner Connecting the Antenna CableAntenna + DVD Recorder & VCR + TV No Cable box If you have two separate antennas one VHFConnections Connections See pages 21 ~ Connecting the Video CableConnecting to a Video input jack You will enjoy regular quality imagesSee pages 21 ~ Video and Component video output are Connecting to an S-Video input jackConnecting to Component video input jacks Y,PB,PR This connection will use your TV’s speakers Connecting the Audio CableConnecting to your TV Select one of the Audio connections on the following pagesConnecting to a stereo amplifier with analog input jacks AV amplifier Connecting to an AV amplifier with a digital input jackTo audio on your TV when using HDMI, set the digi Connecting to a TV with Hdmi JackWhat is the HDCP? Connecting to a TV with DVI JackTo change Hdmi output resolution, see Hdmi connection description Why does Samsung use HDMI?Must choose AV 1 Composite or S-video. See Connecting External DevicesYou can record from connected equipment VCR, STB or DVD You can also use the AV 2 in jacks onIf the AV 2 In input source is not selected Connecting a Camcorder to the AV 2 in jacksInput SEL. button to select proper input Connecting a Camcorder to the DV in jackIf the input is not selected automatically, use Replace the battery cover Install Batteries in the Remote ControlIf the remote control does not operate properly Open the battery cover on the back of the remote controlBrand Codes Setting the Remote ControlReturn Button On-Screen Menu Navigation…/†,œ /√ Buttons Enter ButtonTime Zone Auto Clock SetClock Data CH …† buttons to select Manual Clock SetDaylight Saving Yes or No, thenPress …† buttons to select Channel Set Channel SetAuto Channel Memory Press …† buttons to selectChannel screen. Then, press Channel Add/DeleteRF Output Channel ChannelPress …† buttons to select the desired Setting Up Language Options…† buttons to select RF Output Language , thenDynamic Compression Setting Up the Audio OptionsDigital Output 3D Noise Reduction TV AspectInput Level Black LevelDivXR Registration Setting Up the Parental ControlHDMI/DVI Resolution …† buttons to select Setup, then press Enter or √ buttonRating Level About the Change Password‘Confirm the password’ message will be displayed Press the …† buttons to selectAuto Repeat VCR SettingTape Length Auto PlayPress the …† buttons to select Video Input…† buttons to select Video Input , then …† buttons to select AV 1 orMenu button to exit the menu Automatic Chapter CreatorSystem , then …† buttons to select On, then press Enter or √ buttonOn, then press Enter or √ button Quick RecordingSystem, then press Enter or √ button Quick RecordingRead the following information before playing a disc Before PlayingRegion code DVD-Video only Disc types that can be playedDiscs that cannot be played Playing a DiscSkipping Chapters or Tracks Using the Search & Skip FunctionsFor DVD-VIDEO disc For DVD-RAM/DVD±RW/DVD±R discSlow Motion Play DVD-VIDEO / DVD-RAM / DVD±RW / DVD±R Moving to a scene directly using the AnykeyAbout Anykey Slow Motion Play Step Motion Play…† buttons to select Repeat Repeat PlaybackPlaying RepeatedlyRepeat Playback To return to normal playbackSelecting the Audio language Using the Anykey buttonSelecting the Subtitle language Angle Using the Angle buttonChanging the Camera Clearing a Bookmark Playing back a BookmarkClearing a Marker Using the MarkersPlaying back a Marker Playing an Audio CD CD-DA Buttons on the Remote Control used for CD playbackPlaying back an MP3 Disc Play option will be highlighted When Intro Play is completed, Normal Play is per- formedAudio/MP3 Disc During playback, pressTo select Disc Navigation To Program TracksAnykey button Playlist, thenInsert a MPEG4 Disc into the disc tray Returns to the Album screen Unit enters slide show mode√ll Slide show Rotation orTracking Playing the VCRSkip VHS PlaybackFrame Advance Fps/ReviewScan or Reverse Intro Scan, then press Forward IntroRecordable discs Before RecordingUnrecordable video Recording ModeDVD-RAM/-RWVR mode Recording FormatsContent Protection for Recordable Media Cprm External Devices DV Input jack Recording fromEnter or Timer REC buttonMaking a One Touch Recording OTR# To make Recording mode DVDRecording mode VCR If the timer settings overlapEdit, then press Edit the items you want to modify. See the TimerRecording section for more information on Timer Before starting Basic VCR RecordingMaximum Recording Time SP vs. SLP ScheduledWatch a different media during record- ing Pausing / ResumingWhen the DVD Recorder & VCR is connected To Watch a Different Channel from the One being RecordedDVD -- VCR Copy to DVD or VCRTo copy from DVD to VCR Direct copy DVD to VCRVCR--DVD , then To copy from VCR to DVDDirect copy VCR to DVD Press …† buttonsPlay but Using the Title List buttonUsing the Menu button Playing the Title ListAnykey button Free Space FunctionPlay, Rename, Delete Play to playRename , then RenamingLabeling a TitlePress …† buttons to select a title you want to Or √ buttonStatus LockingProtecting a TitleProtection , then Deleting a Section of a Title Deleting a TitleSelect Delete Then Edit Title List screen is displayedEdit Title List Screen Elements Chapter Edit Screen Elements Editing a Chapter…† buttons to select a title containing a Chapter EditDelete All, Follow steps 1 to 3Enter button PressDivide Title List screen is displayed Dividing a TitleDivide from the Title List, then press Divide Title , thenReturn , then Creating a PlaylistNew Playlist Edit Playlist Playing Titles in the PlaylistRenaming a Playlist Title Playlist , thenFollow these instructions to edit scenes for a playlist Enter the desired characters usingEditing a Scene for the Playlist ButtonsModify, then To setup, follow steps 1 to 3To stop scene play, press Press …† œ √ buttons to select the sceneAdd, then press …† buttons to select Move, then press…† buttons to select the title you want Copying a Playlist Title to the VCRSelect Delete, then Yes, then press Disc ManagerDeleting a Playlist Title from the Playlist Editing the Disc NameDisc Protection Disc ProtectionDisc Manager Button Formatting a DiscFinalizing a disc Player Unfinalizing a disc V/VR modeEnter button Disc is finalized Titles from the record listDelete All Title Lists Title Menu button Edit CompatiblePress √ buttons to select Yes, then press Enter button All Lists are deletedReference Input is displayed Power turns onTimer recording does No response Forget the passwordTroubleshooting DVD Troubleshooting VCR Disc is PAL format and cannot be played on this unit MoviePlease check the disc Make sure there are no scratches or dirt on the discProblem Explanation / Solution Audio Output SpecificationsGeneral InputSamsung DVD Recorder & VCR Contact Samsung World Wide Samsung Electronics AMERICA, INC
Top Page Image Contents