Samsung DVD-VR335 instruction manual Troubleshooting DVD

Troubleshooting (DVD)

Reference

Problem			Explanation/Solution
icon appears on	You cannot use the operation or function due to one of the following reasons:
	(1) Your DVD disc does not support the feature (for example, angles)
the screen.	(2) You've requested a title, chapter, or scan time that is out of the correct range.
Play mode settings are	The disc does not support all the selected functions.
different from the set-	In this case, some settings you configure on the Setting menu may not work properly.
tings configured with
the Setting menu.
Cannot change the	Aspect ratio is fixed on DVD disc.
aspect ratio.
No audio output.	Check whether you selected correct digital output options in the Audio Output Options menu.
No video or audio output.	Did you move your DVD Recorder & VCR suddenly from a cold place to a warm place?
The disc tray is ejected	In this case, do not connect the plug to the power outlet and wait for two hours. Then insert
after 2 to 5 seconds.	the disc and try to play back again. It will work properly when condensation has evaporated.
Angle operation does not	Angle operation is available only when the disc contains images captured at different
work during playback of a	angles.
DVD disc.
The disc revolves, but	• Check whether there is damage or foreign materials on your disc.
	• Some discs with bad manufacturing quality may not be played back.
no image or bad quali-
	• If the scene changes from dark to bright suddenly, the screen may jitter temporarily,
ty images are output.
	but it is not a defect.
Desired sound	Sound languages and subtitle languages are disc-specific.
language and	Only the sound and subtitle languages contained on a DVD disc are available and displayed
subtitle language are	on the	disc menu.
not played.
No progressive	• Check whether PS is displayed on front panel.
	• Make sure to change the component video output using the Progressive button when the
output.
	disc is stopped.
	• Point the remote control at the remote control sensor on your DVD Recorder & VCR.
The remote control	Operate within distance. (15ft)
doesn't work.	Remove obstacles between your DVD Recorder & VCR and remote control.
	• Check whether the batteries are depleted.
	• Read	the table	of contents and then find and read the sections describing your problem,
Other problems	and	follow the	directions given.
	• Turn the unit off and on.
	• If your problem still persists, contact your nearest Samsung service center.
No HDMI output.	• Check the Video output is HDMI enabled.
	• Check the connection between the TV and the HDMI jack of the DVD Recorder &VCR.
	• See if your TV supports this 480p/720p/1080i DVD Recorder &VCR.
Abnormal HDMI	• If snow noise appears on the screen,it means that TV does not support HDCP
output screen.	(High-bandwidth Digital Content Protection).
HDMI output Jitter	• Check your TV system setup correctly.
	• Screen Jitter may occur when the frame rate is converted from 50Hz to 60Hz for
	720p/1080i HDMI (High Definition Multimedia Interface)Output.
	• Please refer to		the user ’s manual of your TV.

96 - English