Samsung DVD-VR335 instruction manual Recording mode DVD, Recording mode VCR, # To make

Press the

timer recording.

6	Fill in the items using the	…†œ √ buttons.
	œ √ : Moves to the previous/next item,

…† or 0~9 : To set or change items in the Scheduled Record List Menu.

•To : Select the media to record (DVD or VCR).

•Source : The video input source (AV 1, AV 2), or the broadcasting channel you want to

make a timer recording from.

•Date: Date that the timer recording starts

- There are three options when setting the date. see below:

!To make a recording on a specific date, press the …† or number buttons until the date you want appears.

No. 01

To	Source	Date	Start	End Mode
DVD	CH06	01/01	03:05 AM 05:05 AM SP
Recordable Time		00:45	SP

@To make a recording at the same time every day

(Mon-Fri), press the				…† buttons		until Mon-Fri
appears:
			No. 01
	To	Source	Date	Start	End Mode
	DVD	CH06	Mon~Fri	03:05 AM 05:05 AM SP
	Recordable Time		00:45	SP

# To make		a recording on a specific day of the
week(Sun’s-Sat’s), press the					…† buttons until
Sun’s….Sat’s appears:
			No. 01
	To	Source	Date	Start	End Mode
	DVD	CH06	Sun’s	03:05 AM 05:05 AM SP
	Recordable Time		00:45	SP

•Start/End Time : Start and end time of the timer recording.

•Recording mode (DVD)

AUTO : Select when you want to set video quality auto- matically. In AUTO mode, the most suitable record mode is adjusted automatically, accord- ing to remaining time on the disc and length of the timer recording.

You can selected only one mode from XP, SP, LP and EP for timer recording.

XP (high quality) : Select when audio and video qualities are important. (Approx. 1 hour)

SP (standard quality) : Select to record in standard qual- ity. (Approx. 2 hours)

LP (low quality) : Select when a long recording time is required.(Approx. 4 hours)

EP (extended mode) : Select when a longer recording

time is required. (Approx.6 hours at 1.2 Mbps or Approx.8 hours at 0.8 Mbps )

	When you are recording at EP mode on a
	DVD-RW(V)/-R disc, it may not record for the
Note
	full 6 or 8 hours because the unit uses the
	VBR(Variable Bit Rate) ENCODING system.
	For example, if you record a program with a lot
	of action, it uses a higher bit rate which in turn
	consumes more disc memory.

•Recording mode (VCR)

AUTO : Select when you want to set video quality automatically. The auto quality depends on remaining time of VCR tape.

SP : Standard Play, for best picture quality.

SLP : Super Long Play, for maximum recording time (3 times SP).

7Press the ENTER button.

• will appear on the front panel. It means that a timer recording is registered.

If the timer settings overlap

The programs are recorded in order of priority. If timer recording is set for the first program and then again for the second program and both programs overlap, the following message will

appear on the screen: “This setting is identical with 1,2.” The message shows that the first program has priority. After recording of the first program is complete, the second program starts being

recorded.

To exit without saving the current setting Press the MENU or TIMER REC button.

To return to the previous menu

RETURN button if you don’t want to set a

8Turn the power off to finish the timer recording.

• will blink if disc or tape is not inserted.

	The timer recording time may differ from the set
	time depending on disc status and overall timer
Note
	recording status (for example, recording times
	overlapping, or when the previous recording
	ends within 3 minutes before the start time of
	the next recording.)

Recording

English - 67