Using Bluetooth Power On
When the product is turned off, you can connect your smart device to the product via Bluetooth to turn it on.
1.Press and hold the CD/Bluetooth button on the remote control to use the Bluetooth Power On function.
•Each time you press this button, the Bluetooth Power mode will change as follows: BLUETOOTH POWER ON BLUETOOTH POWER OFF.
•Set the Bluetooth Power mode to BLUETOOTH POWER ON by pressing this button.
2.Pair your smart device with the product via Bluetooth. (For information on Bluetooth connections, refer to your smart device's manual.)
3.When the product is off, and you initiate a Bluetooth connection with your smart device, the product will turn itself on automatically in Bluetooth mode.
• Select the desired music to play from your smart device.
•This function is available when the Bluetooth Power function is set to BLUETOOTH POWER ON.
•In Bluetooth Power On or Off mode, when the CD, radio, USB or auxiliary source function is selected, if you connect your smart device to the product via Bluetooth, the product will automatically change to the Bluetooth mode.
•The Bluetooth Power mode setting is retained after you turn the Mini off.
Setting the Clock
During each step, you have a few seconds to set the required options. If you exceed this time, you must start again.
1.Switch the system on by pressing the POWER ( ) button.
2.Press the TIMER SET button and then press the ENTER ( ) button, "CLOCK" is displayed.
3.Press the ENTER ( ) button. The hour flashes.
•To increase the hours, press: ,
•To decrease the hours, press: .
4.When the correct hour is displayed, press the ENTER ( ) button. The minutes flash.
•To increase the minutes, press: ,
•To decrease the minutes, press: .
5.When the correct minute is displayed, press the ENTER ( ) button. "
TIME" appears in the display.
•The current time is now set.
•You can display the time, even when you are using another function, by pressing the TIMER SET button once.
•You can also use the ] or [ on the front panel instead of the TUNING/ALBUM , or
. button in Steps 3 and 4.
Timer Function
The timer enables you to switch the system on or off at specific times automatically.
•Before setting the timer, confirm that the current time is correct.
•During each step, you have a few seconds to set the required options. If you exceed this time, you must start again.
•If you no longer want the system to be switched on or off automatically, you must cancel the timer by pressing the TIMER ON/OFF button.
Example: You want to wake up to music every morning.
1.Switch the system on by pressing the POWER ( 
)button.
2.Press the TIMER SET button until 
TIME is displayed.
3.Press the ENTER ( 
) button.
Result: ON is displayed for a few seconds. You
can set the timer
4.Set the timer
aPress the TUNING/ALBUM , or . button to set the hours.
bPress the ENTER ( 
) button.
Result: The minutes flash.
cPress the TUNING/ALBUM , or . button to set the minutes.
dPress the ENTER ( 
) button.
Result: OFF is displayed for a few seconds. You can now set the timer
5.Set the timer
a Press the TUNING/ALBUM , or . button to set the hours.
b Press the ENTER ( 
) button.
Result: The minutes flash.
cPress the TUNING/ALBUM , or . button to set the minutes.
dPress the ENTER ( 
) button.
Result: VOL XX is displayed, where XX corre- sponds to the volume already set.
6.Press the TUNING/ALBUM , or . button to adjust the volume level, and then press the ENTER ( 
)button.
Result: The source to be selected is displayed.
7.Press the TUNING/ALBUM , or . button to select the desired source to be played when the system switches on.
If you select... | You must also... |
|
|
|
|
FM (radio) | a Press the ENTER ( | ) button. |
bSelect a preset station by pressing the TUNING/ALBUM , or . button.
CD/MP3 (compact disc) | Load one compact disc. |
USB | Connect the USB device. |
8.Press the ENTER ( 
) button.
Result: CHKREC (Do you want to record?) is dis- played.