Cancelling the Timer, Listening to Radio

9.Press the ENTER ( ) button.

Result: REC N is displayed. You can press the TUN- ING/ALBUM , or . button to select REC Y or REC N, and then press ENTER ( ) button.

1.If you select REC N, the Mini will not record when it turns on. If you have already set a tuner timer recording, selecting REC N cancels it. Note that the Mini will still turn on and off at the times you set earlier in this procedure.

2.If you select the REC Y, you can set the Mini to record when it turns on. The recording switch on and switch off times can be different from the timer switch on and off times you set earlier in this procedure.

a.Press the ENTER ( ) button.

Result: ON is displayed for a few seconds. You can set the tuner timer recording switch-on time.

b.Press the ENTER ( ) button.

Result: OFF is displayed for a few seconds. You can set the tuner timer recording switch-off time.

• The maximum tuner timer recording time is 5 hours.

•If the timer switch on and off times are identical, the word ERROR is displayed.

•When there is no disc in or USB connected to the Mini, if you select the "CD" or "USB", the Mini automatically selects "TUNER".

•You may use the ], [ buttons on the main unit instead of the TUNING/ALBUM , or . button to adjust settings in Steps 4 through 9.

•If the switch-on or -off time is the same as the timer recording time, only the switch-on or -off time is effective, and the timer recording time is not applied.

•If the auto timer is turned on, the MP3/CD or USB function may require an additional step to be activated depending on the disc (or device). It is better for you to select the tuner function instead.

Cancelling the Timer

After you have set the timer, the unit will start auto- matically at the time shown by the TIMER indication on the display. If you no longer want to use the timer, you must cancel it.

To	Press the TIMER ON/OFF button....

Cancel the timer Once. Result: is no longer displayed.

Restart the timer Twice. Result: is displayed again.

•When you select the TIMER OFF mode, the TIMER RECORDING and TIMER function are not available.

Listening to Radio

You can store up to:

15 FM stations.

1.Select FM by pressing the TUNER/AUX button.

	To search for	Press the TUNING MODE button
	a station	Press the TUNING MODE button
	a station

		One or more times until PRESET is
	Preset	displayed. You can search the
	Preset	stored frequencies in the Preset
		stored frequencies in the Preset
		mode.
		One or more times until MANUAL is
	Manually	displayed. You can search the fre-
	Manually	quencies one by one in the Manual
		quencies one by one in the Manual
		mode.

3.Select the station to be stored by:

•Pressing the TUNING/ALBUM , or . button on the remote control to select the preset station.

•Press and hold the TUNING/ALBUM , or . button on the remote control to automatically search for active broadcasting stations.

4.Press the MO/ST button to switch between stereo and mono.

•In a poor reception area, select MONO for a clear, interference-free broadcast.

•This applies only when listening to an FM station.

5.If you do not want to store the radio station found, return to Step 3 and search for another station.

Otherwise:

a. Press the ENTER button.

b. Or, press the TUNING/ALBUM button on the remote control to select a program number.

c. Press the ENTER button to save the preset.

6.To store additional radio frequencies, repeat Steps

3 through 5. ➣➣In Tuner mode

•In the Manual mode, you can use the [ or ] button on the main unit to manually search for a radio station.

•In the Preset mode, you can use the [ or ] button on the main unit to search for a stored radio station.

Selecting a Stored Station

You can listen to a stored radio station.