Playing a USB Device
Connect an external storage device such as a USB flash memory or external HDD (Hard Disk Drive) to the product. You can play files in MP3/WMA format.
Before you begin!
•Connect the external USB storage device to your product.
•Select the USB mode by pressing the USB 1 or USB 2 button on the main unit or select USB 1 or USB 2 by pressing the USB button on the remote control.
•The first track of the first directory plays automatically, in the following order:
If you select USB 1, USB 1 ➝ STOP. If you select USB 2, USB 2 ➝ STOP.
➣➣To stop playing
Press the STOP ( @ ) button to stop playing.
➣➣To remove the USB device
If you press the STOP ( @ ) button once again, you can remove the USB device safely.
☛☛Do not connect a USB recharger to the USB port of this product. You can damage the product.
To Select a Track from a USB Device
You can select an MP3 file during play.
➣➣If you want to move to the previous/next track, press the [,] buttons briefly.
•The unit moves to the previous/next file within the directory.
•If you press the [,] buttons more times than the number of the files in the directory, the unit moves to the next directory.
To Search a Folder Quickly
1.Press the TUNING/ALBUM button on the remote control to move to the previous/next folder.
2.When the search is done, you will see the previous/next folder name. The track will start playing.
To Repeat
1.Press the REPEAT button.
Each time you press the REPEAT button, the repeat mode will change as follows:
OFF ➝ TRACK ➝ DIR ➝ ALL ➝ RANDOM
2.When you want to stop the Repeat function, press the REPEAT button until "OFF" is displayed.
•OFF: Cancels Repeat Playback.
•TRACK: Repeatedly plays the selected track.
•DIR: Repeatedly plays all tracks in the selected folder.
•ALL: Repeatedly plays all tracks.
•RANDOM: Plays tracks in random order.
To Use High Speed Search
You can search the desired section quickly during play.
➣➣Press the (,) button.
• Each time you press the button, you will move backward/forward fast.
☛☛Sound does not output in fast playback mode.
To Delete a File
You can delete a file on your USB device.
1.Play a file you want to delete.
2.Press the DELETE button.
3.Press [ or ] to select YES.
•To cancel the selection, press the RETURN button on the main unit.
4.Press the ENTER button.
The selected file will be deleted.
☛☛The NTFS file system is not supported.
To Skip 10 Tracks
Press the +10 or
The unit will skip as many as 10 tracks forward or 10 tracks back from the current track.
Read through the instructions below before using a USB device with this unit.
•Some USB devices may not work properly with this product.
•This product only supports external HDD's that are formatted in the FAT file system.
•USB 2.0 HDD's should be connected to a separate power source. Otherwise, the USB 2.0 HDD's will not work.
•If a USB external storage device is connected to multiple devices, only the MP3 files in the first HDD will be played.
•
•Even if the extension of the file is .mp3, the file cannot be played if it is formatted in MPEG layer 1 or 2.
•Do not use a USB hub. USB hubs are not supported.
•The unit displays only the first 15 characters of an MP3/WMA file name.
•This device is designed to support removable HDDs with less than 160GB. Depending on the device, a removable HDD with 160GB or more may or may not be supported.
•It can take several minutes for the product to recognize the files on a USB device.
•USB devices (particularly, USB HDDs) may cause a delay when moving to the next track.
•With USB devices supporting only USB VER. 1.1, the unit may access files slowly or may not recognize file properties.
•In Stop mode, the product will turn off automatically if there is no USB device connected to the USB jack for 25 minutes.