Haier HSU-1218CR03 Power Source Installation, Cutting and Flaring Work of Piping, On Drainage

Page 8

1.Power Source Installation

The power source must be exclusively used for air conditioner. (Over I0A)

In the case of installing an air conditioner in a moist place, please install an earth leakage breaker.

For installation in other places, use a circuit breaker as far as possible.

2.Cutting and Flaring Work of Piping

Pipe cutting is carried out with a pipe cutter and burs must be removed. After inserting the flare nut, flaring work is carried out.

A

Flare tooling die

 

Pipe diameter(

) Size A(mm)

Liquid side

6.35mm(1/4")

0.8~1.5

 

 

 

Gas side

12.7mm(1/2")

1.2~2.0

Correct

Incorrect

Lean Damage of flare Crack Partial Too outside

3.On Drainage

Please install the drain hose so as to be downward slope without fail. Please don't do the drainage as shown below.

 

 

 

Less than 5cm

It becomes high

The end is immersed

It waves.

The gap with the ground

There is the bad smell

midway.

in water.

 

is too small

from a ditch

Please pour water in the drain pan of the indoor unit, and confirm that drainage is carried out surely to outdoor.

In case that the attached drain hose is in a room, please apply heat insulation to it without fail.

Check for Installation and Test Run

Please kindly explain to our customers how to operate through the instruction manual.

Check Items for Test Run

Put check mark in boxes

Gas leak from pipe connecting?

Heat insulation of pipe connecting?

Are the connecting wirings of indoor and outdoor firmly inserted to the terminal block?

Is the connecting wiring of indoor and outdoor firmly fixed?

Is drainage securely carried out?

Is the lamp normally lighting?

Is the earth line securely

Are cooling and heating (when

connected?

in heat pump) performed normally?

Is the indoor unit securely fixed?

Is the operation of room temperature

Is power source voltage abided

regulator normal?

by the code?

 

Is there any noise?

 

8

Image 8
Contents Installation Manual of Room Air Conditioner Fixing of outdoor unit Indoor UnitWhen the mounting plate is fixed side bar and lintel Installation of the Indoor Unit Drawing of pipeMaking a Hole on the Wall and Fitting the Piping Hole Cover Rear pipingOther direction piping When connecting the cable after installing the indoor unitFixing the indoor unit body Indoor unit When connecting the cable before installing the indoor unitEasily-demount cleaning of indoor unit Installation of Outdoor Unit Outdoor unitConnection of pipes ConnectionPurging MethodTo use vacuum pump HSU-12CR03-Y HSU-18CR03-YPower Source Installation Check for Installation and Test RunCutting and Flaring Work of Piping On Drainage

HSU-1218CR03 specifications

The Haier HSU-1218CR03 is a cutting-edge air conditioning unit designed to blend efficient cooling performance with advanced technology, making it an excellent choice for both residential and commercial spaces. This model is characterized by its compact design, allowing it to fit seamlessly into various environments while providing optimal comfort.

One of the standout features of the HSU-1218CR03 is its energy efficiency. Designed with the latest inverter technology, this air conditioner adjusts its cooling output based on the ambient temperature and the desired temperature set by the user. This not only ensures consistent comfort but also significantly reduces energy consumption, leading to lower electricity bills. The inverter technology allows the compressor to operate at varying speeds, minimizing power usage and reducing the frequency of start-stop cycles, which ultimately extends the lifespan of the unit.

Another significant aspect of the Haier HSU-1218CR03 is its advanced air filtration system. The unit is equipped with a multi-stage filtration process that effectively removes dust, allergens, and other airborne particles, creating a healthier indoor environment. This feature is particularly beneficial for individuals with allergies or respiratory conditions, as it helps to maintain a cleaner air quality in the living space.

The HSU-1218CR03 also boasts a user-friendly control system, often featuring a remote control and digital display panel. This allows users to easily adjust settings such as temperature, mode, and fan speed from the comfort of their couch or while lying in bed. Additionally, many models may include smart features, allowing integration with home automation systems, enabling users to control their air conditioning unit via smartphone applications.

Noise reduction technology is another characteristic that sets the Haier HSU-1218CR03 apart from other units. With an ultra-quiet operation mode, this air conditioner ensures that it does not disrupt daily activities or sleep patterns, making it suitable for bedrooms, offices, and other quiet environments.

In summary, the Haier HSU-1218CR03 combines energy efficiency, effective air purification, user-friendly controls, and quiet operation to provide an unparalleled cooling experience. Its versatile features make it an ideal solution for maintaining comfort throughout the seasons while also promoting a healthier indoor atmosphere. Whether for residential or light commercial use, this air conditioning unit represents a smart investment in climate control technology.