Cambridge SoundWorks II user manual Other Connection Situations

Other Connection Situations

1)Using the MicroWorks II as a high performance stereo television sound system.

a)A stereo television with audio signal output typically has two RCA-type jacks (one red, one white). To connect the Volume On/Off Control to these jacks, obtain an audio cable adapter with two RCA plugs at one end and a 3.5 mm stereo minijack at the other end. Connect the GREEN miniplug of the Volume On/Off Control to the adapter's minijack. Connect the adapter's red and white RCA plugs to your television’s red and white RCA jacks. (Do not connect to yellow RCA jacks. These are video out- puts.)

b)Some stereo televisions offer a choice of fixed or variable audio output level. Choose the variable out- put. The fixed output level bypasses the television’s remote volume control.

c)Turn off your television’s internal speakers. This control could be located on the front or back control panels of your television, or it may be an

Green miniplug from

Volume On/Off control

d)If you connect the MicroWorks II to a television with variable audio outputs, you can still use your televi- sion's remote control to adjust overall output. Set the MicroWorks II Volume On/Off control at the 12 o'clock position. Then verify that the television's audio output is adequately loud when the televi- sion's remote control is increased to it's maximum. Increase or decrease the setting on the MicroWorks II Volume On/Off Control (if adjustment is neces- sary), then stow it in an out of the way position.

	VIDEO IN	AUDIO
	2	OUT
1		3 (VARIABLE)

VIDEO

L

(MONO)

AUDIO

R

Signal Cable

One 3.5 mm stereo minijack to two RCA plugs

OR

	VIDEO IN	AUDIO
	2	OUT
1		3 (VARIABLE)

VIDEO

L

(MONO)

AUDIO

R

Minijack to minijack adapter	Signal Cable
Green miniplug from	One 3.5 mm stereo miniplug to two RCA plugs
Volume On/Off control

13