Cambridge SoundWorks II user manual Specifications, Amplifiers

Page 17

SPECIFICATIONS

Analog Input:

775 millivolts for full output

10 kohms input impedance

Amplifiers:

Satellite: 20 watts continuous at 1 kHz, two channels driven at less than .1% total harmonic distortion. Subwoofer: 40 watts continuous at 100 Hz, one channel driven at less than .3% total harmonic distortion.

System Frequency response:

Satellite: 150 Hz to 15 kHz, +/- 3 dB

Subwoofer: 45 Hz to 150 Hz +/- 3 dB

Drivers:

Nominal 6.5 inch subwoofer driver with 8 inch passive radiator Nominal 3.5 inch satellite driver

AC Voltage:

120VAC, 60Hz

Dimensions (H x W x D) and Weights

Satellite (without stand)

4 1/2" x 4 3/8" x 4 7/8"

113mm x 108mm x 125mm

2 pounds, 1 ounce

916 grams

Satellite (with stand)

61/4" x 4 3/8" x 5 5/8" 160mm x 108mm x 143mm 2 pound, 3 ounces

988 grams

Subwoofer

11 1/8" x 10" x 10 3/4", including cables 263mm x 255mm x 275mm

12 pounds, 12 ounces

5.5 kg

17

Image 17
Contents Page Page Page Introduction Table of ContentsQuick Setup Carton Contents Desktop Placement Setup OptionsShelf Placement or other flat surface without Desktop Stand Wall Mounting With Supplied HardwareFloor Stands Wall Mounting With a Swivel BracketMusicWorks Connection DiagramRedred Positioning Your Speakers Positioning the Satellites Shelf PlacementSignal Connections Volume On/Off ControlHeadphones ConnectionsOther Connection Situations Plugs on one end and a 3.5 mm stereo minijack at Speaker Connections AC Connection and PlacementCleaning Operation and Final AdjustmentAmplifiers SpecificationsPage Page Cambridge SOUNDWORKS, INC Dartmouth STREET, WESTWOOD, MA