Cambridge SoundWorks II user manual Plugs on one end and a 3.5 mm stereo minijack at

Page 14

2)Using the MicroWorks II as a sound system for a

	component CD player.	COMPONENT CD OUTPUT
	Typically, there are two RCA-type jacks (one red,
	one white) on the CD player. To connect to these
	jacks, obtain a stereo signal cable with two RCA	OUT
	plugs on one end and a 3.5 mm stereo minijack at	RIGHT LEFT
	the other end. Connect the RCA plugs to the RCA	RIGHT LEFT
	the other end. Connect the RCA plugs to the RCA
	jacks on the player. Connect the Volume On/Off
	Control green miniplug to the minijack of the
	adapter.

Signal Cable

One 3.5 mm stereo miniplug to two RCA plugs

Green miniplug from

Volume On/Off control

Minijack to minijack adapter

OR

OUT

RIGHT LEFT

Signal Cable

One 3.5 mm stereo minijack to two RCA plugs

Green miniplug from

Volume On/Off control

14

Image 14

Contents Page Page Page Introduction Table of ContentsQuick Setup Carton Contents Shelf Placement or other flat surface without Desktop Stand Setup OptionsDesktop Placement Wall Mounting With Supplied HardwareWall Mounting With a Swivel Bracket Floor StandsConnection Diagram MusicWorksRedred Positioning Your Speakers Shelf Placement Positioning the SatellitesHeadphones Volume On/Off ControlSignal Connections ConnectionsOther Connection Situations Plugs on one end and a 3.5 mm stereo minijack at AC Connection and Placement Speaker ConnectionsOperation and Final Adjustment CleaningSpecifications AmplifiersPage Page Cambridge SOUNDWORKS, INC Dartmouth STREET, WESTWOOD, MA