Installation, Safety Precautions | Haier FCD-JTHC40-E, FCD-JTHC50-E

Installation

Connection and Use of Safety Valve:

The safety valve should be connected to the cold water inlet pipe. Please check carefully if the direction is correct after installation. The correct direction of installation is that the arrowhead on the safety valve should point to the water heater.

If your water heater is not installed in a bathroom with sewage drain, please connect the drain hose to the safety valve. Connect one end of the hose to the safety valve vent and the other end to the sewage drain. The hose can be cut short or extended as necessary. The hose shall be installed as inclined downward.

The water may drip from the discharge pipe of the pressure relied device and that this pipe must be installed in a continuously downward direction and in a frost-free environment. Check safety valve once a month as follow: move the small handle of safety valve, if there's water flowing out, safety valve is normal; if there's no water flow, please contact local after-sales service station.

The pressure relief device is to be operated regularly to remove lime deposits and to verify that it is not blocked.

Connect to drain hose

(Fig.4)(Fig.5)

Attentions in Installation

During installation, adequate space must be reserved for future maintenance and repair. If the water heater is installed within decoration boards, the right board shall be removable to facilitate removing the plastic cover during maintenance.

City water inlet pressure shall not be less than 0.05 Mpa.

Electric water heater shall be installed indoors with ambient temperature above 0 . The pipes shall be collectively laid. Hot water outlet shall not be too far from use points. In case farer than 8 m, hot water pipe shall have a thermal insulation to minimize heat loss.

The mounting wall shall be firm and reliable to support twice the weight of water heater full of water. Non-load bearing walls or air brick walls must have corresponding protective measures like additional support, wall-through screws or back boards.

Electric water heater shall be located in a place easy for use, maintenance and with a floor drainer. In case the tank or pipes leak, nearby or lower facilities shall not be damaged. The installation location shall avoid being above toilet bowl, bathtub, washbasin or doorframe, where will cause a suppressed or unsafe feeling to users.

Power socket for water heater shall be in a dry place free of water splash. (splash- proof box is preferred)

Do not confuse inlet and outlet water pipes. Safety valve shall be installed at designated position with no random modification.

Safety Precautions

The water heater shall use a.c 220 V / 50 Hz

Check

if power meter

and wire size are

power supply

from a separate socket (no

multi - purpose

socket)

and

be reliably

consistent with water heater rated current.

grounded. The power

socket

shall meet

If necessary, ask experienced

qualified

national standard requirements. Power plug

electricians to check.

pins shall be cleaned in time to avoid any

contamination causing accidents like fire.

Ð»

Ð£

Do not use damaged wire, socket or

Power socket for water heater shall be

appliances with loose plug, otherwise

located in a dry place free of water spray.

accidents like electric shock, short circuit

Do not insert or pull the power plug with

and fire may occur. Make sure power plug

wet hands, for accidents like electric

closely fits with power socket.

shock or injury may happen.

ÏÚÔ´

Ô´

¿»

»¿

ÓÃÚÏ

ÉÒ

ÒÉ

¢¼

Ó´ÃÓ

Ó´

¼¢

For first use after installation, the tank

must be full of water before connecting the

Please do not point the showerhead

p o w e r .

O t h e r w i s e ,

h e a t i n g

e l e m e n t

towards human body when turning on or

overheat may cause troubles.Children

off the faucet, avoiding to be scalded by a

taking shower must be attended by adults.

small stream of hot water.

Damaged power cord must be replaced

In winter in cold regions, for long-term out-

by after-service technicians with special

of-use, please lift the safety valve handle to

cable (factory provided). Other persons

empty the water, avoiding ice formation

shall not dismantle or repair. In addition,

damaging the water heater.

do not place flammable matters nearby

the water heater.

The product adopts Haier

Safe Care patented technology. In normal installation, even in

severe case that ground wire is live due to wrong connection, the product

Safe Care

technology can filter and efficiently ensure your safety. However, whenever your feel a sensory current, please pull out the power plug and notify local after-service men in time. Do not dismantle by yourself.

Description of the Symbols

Never do that

Be sure to act as per instructions

FCD-JTHC80-E, FCD-JTHC50-E, FCD-JTHC40-E, FCD-JTHC60-E specifications

The Haier FCD-JTHC series of air conditioners is known for its innovative designs and advanced technologies, ensuring efficient cooling and comfort in various environments. Among the notable models in this series are the FCD-JTHC60-E, FCD-JTHC40-E, FCD-JTHC50-E, and FCD-JTHC80-E. Each model brings a unique set of features and characteristics that cater to different cooling needs.

The FCD-JTHC60-E boasts a robust cooling capacity, making it ideal for spacious areas. Its advanced inverter technology adjusts the compressor speed based on the room temperature, resulting in energy savings and consistent comfort. The model also features a sleek design with a user-friendly interface, allowing for easy control via remote or mobile connectivity. The incorporation of air purification technology ensures the indoor air quality remains high, trapping dust and allergens effectively.

Moving to the FCD-JTHC40-E, this compact model is perfect for smaller rooms or apartments. Despite its size, it does not compromise on performance. Similar to its counterpart, it employs inverter technology for energy efficiency. Additionally, it includes a silent mode feature, making it suitable for use during nighttime or in quiet environments. Its quick cooling function allows users to enjoy a comfortable atmosphere shortly after turning the unit on.

The FCD-JTHC50-E strikes a balance between the previous two models, offering versatility for medium-sized spaces. It also comes with smart features, including Wi-Fi connectivity that allows users to control their air conditioner from their smartphones. This model emphasizes energy efficiency and includes a programmable timer, enabling users to schedule cooling times according to their preferences.

Lastly, the FCD-JTHC80-E is designed for larger areas, ensuring optimal cooling power. This model integrates advanced technologies, including a high-density filter that enhances air quality by effectively capturing pollutants and harmful particles. The model’s energy-efficient operation helps reduce electricity costs while maintaining optimal comfort. The FCD-JTHC80-E is equipped with an intelligent temperature control system that adapts to changes in ambient conditions, enhancing user comfort.

In summary, the Haier FCD-JTHC series offers a range of air conditioning units equipped with advanced technologies. From energy-efficient inverter systems to air purification and smart home integration, each model serves distinct needs while ensuring exceptional performance and user comfort. Whether for small rooms or larger spaces, Haier’s commitment to innovation and quality is evident in this diverse product line.