Bose Comprehensive Guide for Installing Portable Speakers

Page 8

Installing Your Speakers From The Rear Of The Bulkhead

A 5

A 6

A 7

A 8

Using the sabre saw, cut the hole for the speaker, carefully following the line. Take your time; you want a smooth-edged circular hole.

Use a half-round file or wood rasp to smooth out any roughness in the hole you have cut.

Hold the speaker enclosure up to the hole from behind the bulkhead and find the best position for the extended portion of the enclosure. Be sure the enclosure is hidden behind the bulkhead. If the enclosure does not fit, use the file or rasp to enlarge the hole.

Place the mounting flange so that it interlocks with the enclosure and is flush with the mounting surface.

8

October 30, 2001

AM188201_02_V.pdf

Image 8

Contents Bose 131TM Marine Speaker System Warranty period Please read this owner’s guideTechnical information For your records…Where to find… Installing Your SpeakersUnpack the carton Tools requiredSelect the locations for your speakers Test the speakers Mounting the speakersInstallation from the rear of the bulkhead Installing Your Speakers From The Rear Of The Bulkhead Installing Your Speakers From The Rear Of The Bulkhead Installing Your Speakers From The Rear Of The Bulkhead Installation from the front of the bulkhead Installing Your Speakers From The Front Of The BulkheadAny roughness in the speaker hole you have cut Installing Your Speakers From The Front Of The Bulkhead Installing Your Speakers From The Front Of The Bulkhead Installing Your Speakers From The Front Of The Bulkhead Cleaning the speakers TroubleshootingCanada European OfficeAustralia Belgique/België